Main Products: , , ,
Fixed blades pitch wind turbine 20kw
Negotiable
Min.Order:1
Product Details
HLD! 20KW windmill generator,20kw wind generator price 20kw wind turbine + PWM controller+ power one inverter 
20kw KW WIND TURBINE MAIN BODY: US$7200.00/set.
( Including 3 pcs blades, nose cone, hub, generator, manual brake system, nacelle, tail rod, tail vane.)
PWM controller with dump load, inverter, tower price will provided seperately.
User can take whole system from us, also can take any part of the system from us.
1. 20kw Wind turbine model selection
Horizontal axis, directly drive, fixed pitch, auto furling wind turbine, FD10-20kw, FD12-20kw.
Permanent magnet generator, 3 phase AC
3 pcs FRB blades, high efficiency, low noise
FD12-20kw wind turbine work in low average wind speed place lower than 6.5m/s;
FD10-20kw wind turbine work in normal average wind speed place 6.5m/s-8m/s.
New designed 20kw wind turbine, pitch controlled, auto eletric controlled by controller, tailless new model work in rich wind speed place.
2. 20kw Wind turbine spec
| Model: | FD12-20kw |
| Rotor Diameter: | 12m/s |
| Number of Blades: | 3pcs |
| Material of Blades: | Fibre glass expoxy |
| Cut-in wind speed: | 3m/s |
| Working wind speed: | 4-30m/s |
| Survival wind speed: | 50m/s |
| Rated wind speed: | 10m/s |
| Rated rotate speed: | 160r/min |
| Rated output power: | 20kw |
| Max output power: | 30kw |
| Type of tower: | Manganese steel independence tower |
| Type of generator: | Permanent-magnet 3 phase AC |
| Speed regulation method: | Yaw |
| Stop method: | Brake by hand drag,controller auto brake protection |
| Working voltage: | DC240v-DC500V, optional |
| Tower height: | 15m-30m or special request |
| Wind turbine main body weight: | 1700kg |
| Measurement(CBM): | 6.5CBM (wind turbine main body and controller) |
| Life span: | 20 years; |
| Warranty: | 3 years |
| Working system: | on/off grid working system |
10m,12m blades rotor diameter optional
directly drive, hotizontal axis
3 pcs FRB blades with protection film
PWM on grid controller with dump load + Aurora power one grid tie inverter
500v working system
Stand alone tower, hydraulic tower, lattice tower (provide foundation drawing)
| Model: | FD10-20kw |
| Rotor Diameter: | 10m |
| Number of Blades: | 3pcs |
| Material of Blades: | Fibre glass expoxy |
| Cut-in wind speed: | 3m/s |
| Working wind speed: | 4-30m/s |
| Survival wind speed: | 50m/s |
| Rated wind speed: | 12m/s |
| Rated rotate speed: | 170r/min |
| Rated output power: | 20kw |
| Max output power: | 30kw |
| Type of tower: | Manganese steel independence tower |
| Type of generator: | Permanent-magnet 3 phrase AC |
| Speed regulation method: | Yaw |
| Stop method: | Brake by hand drag,controller auto brake protection |
| Working voltage: | DC240v-DC500V, optional |
| Tower height: | 15m or special request |
| Wind turbine main body weight: | 1700kg |
| Measurement(CBM): | 6.1CBM (wind turbine main body and controller) |
| Life span: | 20 years; |
| Warranty: | 3 years |
| Working system: | on/off grid working system |
3. Blades, hub for the wind turbine
Vacuum mould blades with protection film
C.W blades, low noise level, high efficiency
FRB material, 3 pcs blades per set
Adjust blades rotor balance before delivery
Iron cast housing made by losting mould. Beautiful and antirust. Rare earth material, high efficiency and low start up torque
Wind turbine assembly
3. Output power data
| Power w | wind speed(m/s) | Rotation speed(r/min) |
working voltage(V) | Output power(W) |
| 20000 | 3 | 57 | 158 | 773 |
| 4 | 83 | 207 | 1259 | |
| 5 | 103 | 235 | 3751 | |
| 6 | 124 | 290 | 7057 | |
| 7 | 141 | 338 | 12794 | |
| 8 | 158 | 367 | 15985 | |
| 9 | 172 | 419 | 19027 | |
| 10 | 191 | 490 | 21037 | |
| 11 | 209 | 520 | 22797 | |
| 12 | 220 | 550 | 23610 | |
| 13 | 235 | 575 | 25194 | |
| 14 | 249 | 590 | 26440 | |
| 15 | 268 | 600 | 27940 | |
| 16 | 268 | 600 | 27940 | |
| 17 | 268 | 600 | 27940 | |
| 18 | 268 | 600 | 27940 | |
| 19 | 268 | 600 | 27940 | |
| 20 | 268 | 600 | 27940 |
4. Wind turbine freatures
| 1. Blade: Manufacturing according to the airscrew structure principle and techniques. |
| Optimal wide TSR & High L/D ratio. With protection film on the edge, long work life. |
| Select blade type by wind tunnel testing. |
| With high efficiency, low noise. |
|
2. Blades rotor: Hub adopts casting molding; Blades rotor and generator adopt universal connection, directly driven. |
| Connection is reliable, durable, smooth operation without vibration. |
| 3. Generator |
|
Rotor: Nd-Fe-B permanent magnet. Prefabricated tangential magnetic circuit rotor; High magnetic flux density, small |
| cubage, good manufacturing process and high performance. |
| Adopt SKF, NSK bearing. |
| Close transmission slip ring, the cable will not enlace. |
| 4. Speed regulation: yaw. Simple, reliable and safety. |
|
5. Anti-corrosion treatment: All the outside parts are designed to anti-salt, anti-fog, anti-atmospheric |
| anti-sandstorm corrosion design. |
|
6.Tower: guy wire tower, tilting up tower, standalone tower, hydraulic tower… It can be designed according to your request. |
| 7. 300w-2.5kw auto braking; 3kw-30kw auto braking system and manual braking system. |
| 8. Wind turbine design principle is simple, safety, reliable, maintenance free. |
| 9. Provide low wind place, rich wind place solution. Wind turbine OEM service. |
5. Working system
Wind turbine on grid system: wind turbine with tower + PWM on grid controller with dump load + grid tie inverter
|
Type |
20KW |
|
Wind turbine rated power |
20KW |
|
Wind turbine Max. power |
40KW |
|
Function |
Rectifier, control, dc output |
|
Display mode |
LCD |
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, DC output voltage, output current, output power |
|
PWM constant voltage |
≥480dc |
|
3-phase dump load voltage 1of the wind turbine |
560±5Vdc |
|
3-phase dump load voltage 2 of the wind turbine |
570±5Vdc |
|
Time-lapse of the wind turbine 3-phase dump load |
12-20 min |
|
Low-voltage |
≤200Vdc |
|
PWM dump load fuse |
63A |
|
DC output fuse |
80A |
|
Work environment temperature |
-30-60°C |
|
Relative humidity |
<90% No condensation |
|
Noise (1m) |
<40dB |
|
Degree of protection |
IP20(Indoor) |
|
Cooling method |
Forced air cooling |
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
|
Size of the controller |
725*570*310 mm |
|
Weight of the controller |
32Kg |
|
Size of the dump load |
810*580*950 mm |
|
Weight of the dump load |
90Kg |
Wind turbine off grid working system:
wind turbine with tower + PWM off grid charge controller with dump + battery group + inverter;
|
Type |
26KW-360Vdc |
|
Wind turbine rated power |
20KW |
|
Wind turbine max. power |
40KW |
|
Solar panel power |
6KW |
|
Battery |
360Vdc |
|
Function |
Rectifier,charge, control |
|
Display mode |
LCD |
|
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
|
PWM constant pressure voltage |
>420Vdc |
|
3-phase load voltage of the wind turbine |
435±5Vdc |
|
Recovery charging voltage of the wind turbine |
405±5Vdc |
|
Solar controller stop charging voltage |
435±5Vdc |
|
Solar restore charge voltage |
405±5Vdc |
|
Low-voltage of the battery |
300±5Vdc |
|
Self-provided connecting wire of the battery |
>12mm² |
|
PWM fuse |
40A |
|
Solar fuse |
20A |
|
Charging fuse |
80A |
|
Work environment temperature |
-30-60°C |
|
Relative humidity |
<90% No condensation |
|
Noise (1m) |
<40dB |
|
Degree of protection |
IP20(Indoor) |
|
Cooling method |
Forced air cooling |
|
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
|
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
|
Size of the controller |
560*460*950 mm |
|
Weight of the controller |
53 Kg |
|
Size of the load |
810*580*980mm |
|
Weight of the load |
77Kg |
Wind solar hybrid off grid system, diesel or grid power as backup power
Matched PWM controller with dump load
Controller converts 3 phase AC power to Dc and charge to the battery group or feed to the grid tie inverter.
Controller with auto brake function, PWM voltage stablization function.
Matched with off grid single phase/ 3 phase pure sine wave inverter.
On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter.
Inverter for on/off grid system:
Matched (3 phase )grid tie inverter 10k*2 sets, add isolation transformer between two grid tie inverters/Matched 1 Inverter Trio-20.0-TL-OUTD-W
Pure sine wave inverter single phase/ 3 phase
Inverter output voltage, frequency can be manufactured according to different countries request.
|
Type |
NB110-20KD |
NB220-20KD |
|
|
DC input |
Input rated voltage |
110 VDC |
220 VDC |
|
|
Input rated current |
182 A |
91 A |
|
|
Input DC voltage range |
80-145 VDC |
180-300 VDC |
|
AC input |
Allow input voltage range |
110 VAC /120 VAC /220 VAC /240 VAC ± 15% VAC |
|
|
|
Input rated current |
182A / 167A / 91 A / 83A |
|
|
|
Bypass transfer time |
WITHIN 4 ms |
|
|
AC output |
Rated capacity |
20KVA |
|
|
|
Output rated power |
16KW |
|
|
|
Output rated voltage and frequency |
110 VAC / 120 VAC / 220 VAC / 240 VAC ,50Hz / 60Hz |
|
|
|
Output rated current |
182A / 167A / 91 A / 83A |
|
|
|
Output voltage accuracy |
110 VAC / 120 VAC / 220 VAC / 240 VAC±2% |
|
|
|
Output frequency accuracy |
50Hz / 60Hz ± 0.05% |
|
|
|
Waveform distortion (THD). (Linear load) |
≤3% |
|
|
|
Dynamic response time (Load 0←→100%) |
5% |
|
|
|
Power factor (PF) |
0.8 |
|
|
|
Overload capacity |
120%,3 minutes,150%,10 second |
|
|
|
Crest factor (CF) |
3:1 |
|
|
|
Inverter efficiency |
90% |
|
|
Working Environment |
Dielectric strength |
1500VAC,1minute |
|
|
|
Noise (1m) |
≤50dB |
|
|
|
Ambient temperature |
-10℃~+50℃ |
|
|
|
Humidity |
0~90%,No condensation |
|
|
|
Altitude |
≤5000 m |
|
|
Production function |
Input reverse protection, input under-voltage protection, output overload protection, output short circuit protection, thermal protection |
||
6. Application
Home, farm, signal station, island, garden...
7. Tower type: stand lone tower, hydraulic tower (optional)
Tower height can be manufacture according to user's request.
The tower with hot-galvanized
We provided the tower foundation drawing after confirm the tower type, tower height.
Wind turbine main body, blades, pma, tail, controller, inverter: plywood case
Tower: soft packages
Delivery by sea
FOB/C&F, CIF
500w-3kw wind turbine : 3-5 working days after payment
5kw-30kw wind turbine: 7-10 working days after payment
50kw-60kw 15-20 days after payment
Tower needs about 10 working days after payment
| 20kw WTG packing list | |||||
| Item | Description | Packing | G.W(Kg) | ||
| Packing method | outside size(m) | ||||
| 1 | Hub,nose cone and under cover | plywood box | 0.55 | 150 | |
| 2 | Generator/rotor body | plywood box | 1.77 | 890 | |
| 3 | Blades | plywood box | 2.09 | 390 | |
| 4 | Tail vane | Tail vane plate | plywood box | 0.85 | 255 |
| Tail vane frame | |||||
| Giant-shaped steel & others | |||||
| 5 | Tail rod | soft package | 0.25 | 75 | |
| 6. | On grid controller | carton | 0.10 | 30 | |
| grid tie inverter | plywood case | 0.15 | 40 | ||
| 7. | Unload box | carton | 0.46 | 77 | |
| TTL: | 6.23cbm | 1907 | |||
Provide professional wind turbine technical support;
Provide on/off grid system design, wind solar hybrid system design service.
Completely system provider and designer;
Wind turbine type, model, capacity selection professional support;
Tower design, foundation drawing support;
Provide Pma, hub, flange drawing;
Provide OEM service, customized service.
Support paypal /west union payment, TT payment;
We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now.
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
CE/CNACL/TRUCK TEST FOR VERTICAL AXIS WIND TURBIEN/SWT
FACTORY/OFFICE/WORKSHOP
1. Wind turbine model selection
It depends your local annual average wind speed, daily/monthly home power consumption.
Low average wind speed place, select larger blades rotor, higher rated working voltage;
Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.
The safety and steady working system is the first choice.
2. Wind turbine tower selection
Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower.
Guy wire tower cost is lower, easy to delivery. But the installation area is larger;
Tilting up tower is for 500w-5kw wind turbine. Easy installation, small installation area. But the delivery cost is higher.
Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.
Stand alone tower for the installation place with crane.
The tower height: Make sure blades rotor is higher than wind turbine surrounding barrier height.
3. Working system selection
On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;
Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;
Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.
Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s.
For more question, pls contact with us directly. We will give you a professional response.
Why select us:
We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.
I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request.
In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln