10KW Wind power Generator with 96v 120v 240v 280v 300v 360v 380v 500v 700v

 

1. 10kw Wind turbine model selection

 

Horizontal axis, directly drive, fixed pitch, auto furling wind turbine, FD8-10kw, FD10-10kw.

 

Permanent magnet generator, 3 phase AC

 

3 pcs FRB blades, high efficiency, low noise

 

FD10-10kw wind turbine work in low average wind speed place lower than 6.5m/s;

 

FD8-10kw wind turbine work in normal average wind speed place 6.5m/s-8m/s.

 

New designed 10kw wind turbine, pitch controlled, centrifugal pitch regulated, work in rich wind speed place.

 

 

6. Application

Home, farm,  signal station, island, garden... 

 

 

7. pma

 

Vacuum mould blades with protection film

C.W blades, low noise level, high efficiency

FRB material, 3 pcs blades per set 

Adjust blades rotor balance before delivery

  Iron cast housing made by losting mould. Beautiful and antirust. Rare earth material, high efficiency and low start up torque

 

 

FRB Blades for wind turbine:

 

 

  

8. Tower type: stand lone tower, hydraulic tower (optional) 

 

Tower height can be manufacture according to user's request. 

The tower with  hot-galvanize.

We provided the tower foundation drawing after confirm the tower type, tower height. 

 

10. Matched controller 

 

Controller converts 3 phase AC power to Dc and charge to the battery group or feed to the grid tie inverter.  

Controller with auto brake function, PWM voltage stablization function. 

Matched with off grid single phrase/ 3 phrase pure sine wave inverter. 

On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter. 

 10kw 120v off grid controller spec: 

Type	13KW-120Vdc
Wind turbine rated power	10KW
Wind turbine max. power	20KW
Solar panel power	3KW
Battery	120Vdc
Function	Rectifier,charge, control
Display mode	LCD
Display content	Wind turbine voltage, wind turbine current,  wind turbine power, solar panel voltage,  solar panel current, solar panel power, battery  voltage, charge current
PWM constant pressure voltage	>138Vdc
3-phase load voltage of the wind turbine	145±2Vdc
Recovery charging voltage of the wind turbine	135±2Vdc
Solar controller stop charging voltage	145±2Vdc
Solar restore charge voltage	135±2Vdc
Low-voltage of the battery	100±2Vdc
Self-provided connecting wire of the battery	>12mm²
PWM fuse	80A
Solar fuse	25A
Charging fuse	125A
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
*Communication interface (optional)	RS485/USB/GPRS/Ethernet
*Temperature compensation (optional)	-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C
Size of the controller	550*400*230 mm
Weight of the controller	21Kg
Size of the load	760*510*430 mm
Weight of the load	34 Kg

 10kw on grid controller with dump load spec: 

 

Type	10KW
Wind turbine rated power	10KW
Wind turbine Max. power	20KW
Function	Rectifier, control, dc output
Display mode	LCD
Display content	Wind turbine voltage, wind turbine current,  wind turbine power, Solar panel voltage, solar panel current, solar panel power, DC output voltage, output current,  output power
PWM constant voltage	≥480dc
3-phase dump load voltage of the wind turbine	560±5Vdc
Time-lapse of the wind turbine 3-phase dump load	12-20 min
Low-voltage	≤200Vdc
PWM dump load fuse	32A
DC output fuse	40A
Work environment temperature	-30-60°C
Relative humidity	<90% No condensation
Noise (1m)	<40dB
Degree of protection	IP20(Indoor)
Cooling method	Forced air cooling
*Communication interface (optional)	RS485/USB/GPRS/Ethernet
*Temperature compensation (optional)	-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C
Size of the controller	655*480*320 mm
Weight of the controller	26Kg
Size of the dump load	760*520*550 mm
Weight of the dump load	38Kg

 

 

 

11. Matched (3 phase )grid tie inverter 10kw or 15kw. pure sine wave inverter single phase/ 3 phase

Inverter output voltage, frequency can be manufactured according to different countries request. 

 

technology index		10KD
DC Input	rating capability(KVA)	10.0
	Input rating voitage(VDC)	240
	DC in input voltage range allows(VDC)	190-300
AC output	Output rating capability(KVA)	10.0
	Output raring voltage and frequency	220VAC,50HZ
	output voltage precition(V)	220V±3%
	output frequency precition(HZ)	50±0.05
	wave distortion rate	≤3%
	Dynamic Response  (load 0←→100%)	5%
	power factor(PF)	0.8
	over loading ability	120%,10s
	Peak coefficient (CF)	3:1
	inverting efficiency(80% resistive load)	90%
	convertion time(millisecond)	≤4ms
Working environments	Dielectric StrengthVAC(input and output	1500
	noise(1meter)	≤50dB
	tempreture of using environment	-10℃~+50℃
	humidity	0~90%,no condensing
	altitude(m)	≤2000

 

 

Wind turbine main body, blades, pma, tail, controller, inverter: plywood case

 

Tower: soft packages

 

Delivery by sea, by air

 

FOB/C&F, CIF

 

500w-3kw wind turbine : 3-5 working days after payment

 

5kw-30kw wind turbine: 7-10 working days after payment

 

50kw-60kw 15-20 days after payment

 

Tower needs about 10 working days after payment

  

Item	Description		Packing		G.W(Kg)
			Packing method	outside size(m)
1	Hub,nose cone and under cover		plywood box	0.68*0.71*0.77	48
2	Generator/rotor body		plywood box	2.06*1.14*0.72	670
3	Blades		plywood box	3.58*0.59*0.42	140
4	Tail vane	Tail vane plate	plywood box	2.08*1.28*0.32	270
		Tail vane frame
		Giant-shaped steel & others
5	Tail rod		soft package	3.3*0.54*0.14	75
6.	On grid controller		carton	0.570*0.550*0.330	26.5
7.	Unload box		carton	0.770*0.550*0.460	34.5
TTL:				4.35	1264

 

 

 

 

Provide professional wind turbine technical support; 

Provide on/off grid system design, wind solar hybrid system design service.  

 Completely system provider and designer;  

Wind turbine type, model, capacity selection professional support; 

Tower design, foundation drawing support; 

Provide Pma, hub, flange drawing; 

Provide OEM service, customized service.  

 Support paypal /west union payment, TT payment;

 

 

 

 

 

We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now. 

 

 We manufacture 300w-30kw fixed pitch wind turbine;

 

2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;

 

On grid system/off grid system, wind solar hybrid system; Water heating system;

 

For more details, pls contact with us via e-mail.

 

 1. Wind turbine model selection

 

It depends your local annual average wind speed, daily/monthly home power consumption. 

 

Low average wind speed place, select larger blades rotor, higher rated working voltage;

 

Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.

 

The safety and steady working system is the first choice. 

 

2. Wind turbine tower selection

 

Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower. 

Guy wire tower cost is lower, easy to delivery. But the installation area is larger;

 

Tilting up tower is for 500w-5kw wind turbine.  Easy installation, small installation area. But the delivery cost is higher. 

 

Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher. 

 

Stand alone tower for the installation place with crane. 

 

The tower height:  Make sure blades rotor is higher than wind turbine surrounding barrier height. 

 

3. Working system selection

 

On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;

 

Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;

 

Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.

 

Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s. 

For more question, pls contact with us directly.  We will give you a professional response. 

 

Why select us:

 

We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.

 

I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request. 

In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.