FRP angle which is one of its main products. During the pultrusion process, the raw materials are pulled through a heated steel forming die using a continuous pulling device. FRP Pultruded Profile are made of different resins reinforced with fiberglass, by pultrusion technology.

Series of our pultrusion profiles include square tube,rectangular tube,round tube,angle,I-beam,channel,rod and other custom profiles. Our company can be customized according to customer requirements, the product images and properties are for reference only, and the more details requested please contact us!

The FRP round pipe can be used in chemical plant,petrochemical & refinery plant, fertilizer plant,marine,power plant,waste water treatment plant. Such as cross bracing,clip angles,short column fabrication,concrete embedment,display racks,overhead pipe supports,under bridge/pier pipe supports ect.

>> Exceptional Strength: reduce damage caused by accidental collisions

>> Light Weight: Weighing up to 80% less than steel and 30% less than aluminium

>> Corrosion Resistant: unaffected by exposure to a wide variety of corrosive chemicals and environments

>> Maintenance Free: The corrosion resistant properties remove the necessity of periodic painting or surface treatment.

>> Low Thermal Conductivity: around 1/250 of aluminium, and 1/60 of steel

>> Non Conductive: electrically non-conductive, ideal for cable trays, ladders, platforms

>> Electromagnetic Transparency: transparent to radio waves, microwaves and other electromagnetic frequencies

>> Dimensional Stability: resistant to stretching, warping, or swelling over a wide range of temperatures & physical stresses

>>Thermal Stability: withstanding continuous exposure to temperatures of up to 65 degrees centigrade

>> Easy to install and maintain 

>> Rich color: there are many colors for you to choose

Production process is a continuous production process to produce fiber-reinforced polymer profiles of any length and constant section. Reinforcement fibers may be roving, continuous mat, woven roving,carbon or others. 

The fibers are impregnated with a polymer matrix (resin, minerals, pigments, additives) and passed through a pre-forming station that produces the stratification necessary to give the profile the desired properties.  After the pre-forming step, the resin-impregnated fibers are pulled through a heated die to polymerize the resin.