Recommend Products
Product Description
HOW TO USE ANTISKID AGENT？
1. Clean the floor, clean the floor, remove the dirt from the floor, wipe the water on the floor and wait for it to dry completely.
1. Clean the floor, clean the floor, remove the dirt from the floor, wipe the water on the floor and wait for it to dry completely.
2. Start the construction, pour the anti-skid agent on the dry ground, and evenly spread the anti-skid agent with a brush or flat mop to ensure a certain thickness.
3. Wash the ground and wait for 20-30 minutes. Large area can be washed with a large amount of water. Small area can be cleaned and dried with mop.
4. After the completion of the construction, you can walk or use water for testing.
CONSTRUCTION PRECAUTIONS:
1. The antiskid agent construction must be done according to the requirements, and can not be taken for granted according to their own ideas, otherwise the antiskid effect may be reduced and the service life will be weakened.
1. The antiskid agent construction must be done according to the requirements, and can not be taken for granted according to their own ideas, otherwise the antiskid effect may be reduced and the service life will be weakened.
2. Special attention: in the construction process, the antiskid agent must not stay on the ground for too long, and the ground must be cleaned in time (or dragged repeatedly). The wet bubble time of construction must not exceed 30 minutes. Generally, the ground will be cleaned in 20-30 minutes, otherwise, the antiskid agent may remain on the ground and form white traces (it will take a long time to completely disappear).
3. Some customers think that the longer the soaking time is, the better. Some customers think that the cleaning effect will be better if the ground needs to be dried. Some customers even don't clean the foundation. These ideas are wrong. Only according to the requirements of construction effect and life can the ideal state be achieved.
4. For large-scale construction, customers should pay attention to the cleaning of the first construction place (wet mop can be used repeatedly). They can't wait until all the construction is completed, which may make the soaking time of the first construction place longer.
5. Especially bright tiles (such as high gloss glazed tiles and vitrified tiles) need to be diluted with 20% ~ 30% water before use. If they are used directly without water, it may have a certain impact on the beauty and gloss of tiles!
6. there is a layer of wax oil on the surface of the new tile. Any liquid can not be painted. We only need to add a little detergent to the antiskid agent so that a lot of bubbles can be produced by the antiskid agent, because the foam will stay on the tiles and will not shrink and flow away.
8. During construction, please wear gloves. The skin should not be in direct contact with antiskid agent. In case of accidental contact, please wash it with plenty of soapy water.
10. Please keep this product out of reach of children and pets.
7. This product will produce a little sub gloss effect on the surface of individual bright tiles, so please test it in the hidden place before using it.
8. During construction, please wear gloves. The skin should not be in direct contact with antiskid agent. In case of accidental contact, please wash it with plenty of soapy water.
9. If it gets into the eye, please wash it with clean water and see a doctor in time.
10. Please keep this product out of reach of children and pets.
Company Profile
Caution
1. Do not return used putty and mixture to the Bsae can.
2. Used tools shall be washed with lacquer thinner.
3. Store free from fire, direct sun-shine, high temperature and rain drop..
2. Used tools shall be washed with lacquer thinner.
3. Store free from fire, direct sun-shine, high temperature and rain drop..
Safaty precaution
Flammable. Harmful by inhalation. Irritation to eyes and skin. Keep out of reach of children. Keep in a cool place. If swallowed, seek medical advice immediately and show this container or label. Use only in well ventilated areas.
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
FAQ
1. Q:What's your MOQ?
A:Our MOQ is 300 Liters.
2. Q: Can we do OEM?
A:Yes, OEM is welcome.
3. Q: Are you manufacturer or trading company?
A:We are professional manufacturer and we have our own factory.
A:Our MOQ is 300 Liters.
2. Q: Can we do OEM?
A:Yes, OEM is welcome.
3. Q: Are you manufacturer or trading company?
A:We are professional manufacturer and we have our own factory.
4. Q:Can we visit your factory?
A:Yes. You are welcome to our factory.
A:Yes. You are welcome to our factory.
5. Q:How about your payment?
A:30% deposit in advance, 70% balance by T/T, L/C, paypal, Western Union or else before shipment.
A:30% deposit in advance, 70% balance by T/T, L/C, paypal, Western Union or else before shipment.
6. Q:Do you provide samples?
A:Yes, we can provide you with free samples, you just need to pay for freight.
A:Yes, we can provide you with free samples, you just need to pay for freight.
7. Q:How about your delivery time?
A:Usually 20 workdays after receiving your deposit.
A:Usually 20 workdays after receiving your deposit.