ZTC160E451 ZOOMLION 16 ton truck crane:
Full drive with two axles, Weichai EURO V (WP6.245E50/180kW) engine, 8-speed synchronizer gearbox, 457 single-reduction drive axle,

standard hoarding, four-section U-shaped main boom (10.1~33m), double winding Yang, dual variable motor, manual operation.

 

ZTC251V451 ZOOMLION 25 ton truck crane:
Full drive, rubber suspension, Weichai WP7.270E51 engine, 8-speed full synchronizer gearbox, 4 U-shaped main booms (10.7~35m), one jib (8m),

double winches, wire rope diameter 17mm, double Variable motor, five outriggers, heating and cooling air conditioners on and off the vehicle, manual operation, 25t main hook, 3t auxiliary hook.

 

ZTC250A552 ZOOMLION 25 ton truck crane:
Full drive, Taizhou Shenzhou single-reduction bridge, rubber suspension; Weichai (WP7.270/199kW) EURO V engine, 8-speed full synchronizer gearbox;

Five-section U-shaped main boom (10.5~41m), one jib ( 8m); Double winch, double variable motor, hydraulic pilot control, five outriggers,

heating and cooling air-conditioning on and off the car. Standard 12R22.5 tubeless tires. 25t main hook, 3t auxiliary hook.

 

QY25H552 ZOOMLION 25 ton truck crane:
Full drive, double reduction bridge, rubber suspension, WP8.320 engine + 9JS135T gearbox (with synchronizer), five U-shaped main boom (10.7~42m), one jib (8m),

double winch, double variable Motor, hydraulic pilot control, the fifth leg, on-board heating and cooling air conditioning,

4.0 control room 910 (without pitch function), three-color light, 25t main hook, 3t auxiliary hook.

 

 

STC160 truck crane:

The three-axle cranes are capable of accessing various urban or small jobsites, featuring high flexibility and fast transferring.

Full Counterweight 2.6T
Max Lifting Capacity 16T
Max Boom Length 32m
Max Jib Length 8m
Max Lifting Height 40.5m
Max Lifting Moment 730kN·m
Engine Model (Emission Standard) SDEC SC7H260Q3 (Euro 3)
Max Gradeability 40%
Max Traveling Speed 80km/h
Wheel Formula 6×4×2

 

 

XCT16 truck crane:

Category	Item			Unit	Parameter
Main performance	Max. total rated lifting capacity			t	16
	Min. rated working radius			m	3
	Turning radius at turntable tail (counterweight)			mm	3180
	Max. load moment	Base boom		t.m	730
		Fully-extended boom		t.m	475
	Outrigger span	Longitudinal		m	5.1
		Lateral		m	5.8
	Hoist height	Base boom		m	10.5
		Fully-extended boom		m	32.5
		Fully-extended boom + Jib		m	40.6
	Boom length	Base boom		m	10
		Fully-extended boom		m	32
		Fully-extended boom + Jib		m	40.15
	Jib offset angle			°	0, 15, 30
Working speed	Boom elevating time	Boom raising time		s	≤35
	Boom telescoping time	Boom fully extending time		s	≤50
	Max. slewing speed			r/min	≥3
	Main winch system		No load	m/min	≥130
	Luffing jib winch		No load	m/min	≥130
Noise	Exterior noise level			dB (A)	≤120
	Noise level at seated position			dB (A)	≤90