SHANTUI 320hp 38ton large crawler bulldozer SD32W with rock-type blade and tracks cheap price

Engine:

Make: Cum-mins
Model: NTA855-C360S10
Rated Power: 235 kW @ 2000 rpm
Maximum Torque: 1440 Nm @ 1400 rpm
Displacement: 14.010 L
Cylinder: 6 - 139.7 x 152.4 mm (bore x stroke)
Water cooled: Yes
Direct injection: Yes
Radiator: Enlarged tropical radiator 

 

Power transmission: 

Make: SHANTUI
Torque converter: YJ409, 3-element, single-stage, single phase, ratio 2.3 - 2.54
Transmission: Planetary gear type, multi-disc clutch, hydraulically connected, forced lubri- cation
Main drive: Spiral bevel gear, splash lubrication, single-stage speed reduction, ratio 2.33
Steering clutch: Wet, multi-disc, spring loaded, hydrauli- cally seperated, hydraulic control
Steering brake: Wet, floating, direct on-off hydraulic inter-linking operation
Final drive: 2-stage speed reduction of spur gear, splash lubrication, ratio 17.19
Number of drive wheel teeth: 25

 

Undercarriage system:

Make: SHANTUI
Type: Swing type of sprayed beam, suspended structure of equalizer bar
Carrier rollers: 2 each side
Track rollers: 7 each side
Track type: Assembled, single-grouser track
Track shoe width: 560 mm
Grouser height: 80 mm
No. of track shoes: 41 each side
Pitch: 228.6 mm
Ground pressure: 0.084 Mpa

 

Hydraulic control system:

Rated pressure: 14 MPa
Pump type: Gear Pump
Flow rate: 355 L/min
Blade lift cylinder: Φ140 mm × 2
Blade tilt cylinder: Φ225 mm × 1
Ripper cylinder: Φ225 mm × 4

 

Cab:

ROPS & FOPS: YES
A/C: YES
Adjustable air suspension seat: YES
Seat belt: YES
Strobe light: YES
Fire extinguisher: YES, SABS Standard
Engine oil pressure meter: YES
Hydraulic oil temperature meter: YES
Coolant temperature meter: YES
Hour meter: YES
Voltage meter: YES

 

Overall length: 8650 mm
Overall width: 4130 mm
Overall height: 3725 mm
Ripper overall width: 2420 mm
Machine width (Blade off): 2780 mm
Machine length (Blade off): 7360 mm
Min. ground clearance: 500 mm
Min. turning radius: 3.8 m
Gradeability: 30°
Track Gauge: 2140 mm
Operating weight: 38 ton

Batteries: 2 x 12 V-165 Ah
Starter Motor: 7.5 kW
Alternator: 35 A

Fuel tank: 640 L
Engine coolant: 121 L
Engine oil: 47 L
Hydraulic tank: 164 L
Transmission and steering case: 185 L
Final drive case: 110 L each side

ITEM	SD32W	Engine	Cum-mins NTA855-C360S10
L×W×H (Ripper not included)	6880×4130×3640mm	Ripping depth of ripper	Single ripper 1250mm
Operating weight (Ripper not included)	38t		Three-shank ripper 842mm
Rated power	235/2000kW/rpm	Lifting height of ripper	Single ripper955mm Three-shank ripper 883mm
Gradeability	30°	Number of carriers (each side)	2
Blade type	Straight tilt blade	Number of track rollers (each side)	7
Blade width	4130x1590 mm	Number of track shoes (each side)	41
		Width of track shoe	560mm
		Track gauge	2140mm
		Ground length and ground pressure	3150-0.105mm/MPa
Dozing capacity	10m3	Pitch	228.6mm
		Forward speed	0–3.6km/h
			0–6.6km/h
			0–11.5km/h
Ma× drop below ground of blade	560 mm	Reverse speed	0–4.4km/h
Lift height of blade	1560 mm		0–7.8km/h
Ripper type	Single ripper Three-shank ripper		0–13.5km/h