Shantui 130hp/160hp sanitation bulldozer SD13R/SD16R for landfill leveling semi-compacting stacking operation
Product Description
SD16R sanitation bulldozer is developed in response to the operation demands of sanitation treatment sites in domestic cities and is applicable for the landfill, leveling, semi-compacting, and stacking operations in waste yards as well as the traction of steel garbage chute and treatment tank station.
| Engine | |||||||||||||||||||
| Model | STE-YR WD615TI-3A or SHANGCHAI C6121 (Ca-ter-pillar license) | ||||||||||||||||||
| Type | In-line, 4-cycle, direct injection, water cooled | ||||||||||||||||||
| Flywheel power, kW |
120 | ||||||||||||||||||
| Rated speed, r/min |
1850 | ||||||||||||||||||
| Max. torque (at 1400 r/min), Nm | 764 | ||||||||||||||||||
| Number of cylinders - bore x stroke, mm | 6 - Ø126 x 130 | ||||||||||||||||||
| Piston displacement, L | 9.726 | ||||||||||||||||||
| Fuel consumption rate, g/kWh |
≤214 | ||||||||||||||||||
| Starting method | Electric starting, 24V | ||||||||||||||||||
| Transmission system |
|||||||||||||||||||
| Torque converter | 3-element, single-stage, single-phase | ||||||||||||||||||
| Transmission | Planetary gear, power-shift, forced lubrication | ||||||||||||||||||
| Main drive |
Spiral bevel gear, single-stage reduction, splash lubrication | ||||||||||||||||||
| Steering clutch |
Wet, multi-disc, spring loaded, hand hydraulically separated, inter-linking with steering brake | ||||||||||||||||||
| Steering brake | Wet, floating band structure, foot pedal with hydraulic booster | ||||||||||||||||||
| Final drive |
Spur gear, double reduction, splash lubricated | ||||||||||||||||||
| Travel speed, km/h | |||||||||||||||||||
| Forward: | |||||||||||||||||||
| • 1st | 3.3 | ||||||||||||||||||
| • 2nd | 5.3 | ||||||||||||||||||
| • 3rd | 9.6 | ||||||||||||||||||
| Reverse: | |||||||||||||||||||
| • 1st | 4.3 | ||||||||||||||||||
| • 2nd | 7.6 | ||||||||||||||||||
| • 3rd | 12.5 | ||||||||||||||||||
| Under carriage | |||||||||||||||||||
| Sprocket | Segmented | ||||||||||||||||||
| Track tension | Hydraulic-adjusted | ||||||||||||||||||
| Number of track rollers, each side | 6 | ||||||||||||||||||
| Number of carrier rollers, each side | 2 | ||||||||||||||||||
| * Floating seals are used in all track rollers, carrier rollers, sprocket and front idlers | |||||||||||||||||||
| Track | |||||||||||||||||||
| Track type |
Assembled, cycloidal triangle shoes | ||||||||||||||||||
| Undercarriage type | Swing type of sprayed beam, suspended structure of equalizer bar | ||||||||||||||||||
| Track pitch, mm | 203.2 | ||||||||||||||||||
| Track width, mm | 1100 | ||||||||||||||||||
| Ground clearance, mm |
495 | ||||||||||||||||||
| Track gauge, mm |
2300 | ||||||||||||||||||
| Ground pressure, MPa |
0.027 | ||||||||||||||||||
| Hydraulic system of work equipment | |||||||||||||||||||
| Working pressure, MPa |
20.6 | ||||||||||||||||||
| Rated flow (at 1800 r/min), L/min | 249 | ||||||||||||||||||
| Pump | Gear pump and PPC pump | ||||||||||||||||||
| No. of working cylinders - bore, mm | 2-Ø110 | ||||||||||||||||||
| Valve position |
Raise, hold, lower, float | ||||||||||||||||||
| Work equipment | |||||||||||||||||||
| Blade type | Straight tilt blade | ||||||||||||||||||
| Dimensions, Length x Width x Height, mm | 4690×4150×3130 | ||||||||||||||||||
| Weight, kg |
18460 | ||||||||||||||||||
| Blade dimensions, Width x Height, mm | 4150×1578 | ||||||||||||||||||
| Blade weight, kg |
1592 | ||||||||||||||||||
| Max. drop below ground, mm |
485 | ||||||||||||||||||
| Dozing capacity, m³ |
8.2 | ||||||||||||||||||
| Efficiency (on 40 m distance), m³/h | 250 | ||||||||||||||||||
| Max. tilt adjustment, mm | 1005 | ||||||||||||||||||
| Min. turning radius, m | 3.06 | ||||||||||||||||||
| Gradeability, ° | 30 | ||||||||||||||||||
| Ripper | 1-shank | ||||||||||||||||||
