FCY100 10t Loading capacity hydraulic dump truck tipper truck
Negotiable
Min.Order:1
NO. | Item | Specifications | ||
1 | Payload | 10000kg | ||
2 | Operating weight | 7850 kg | ||
3 | Bucket capacity | 4.5 m3 | ||
4 | Maximum speed | 25-30 km/h | ||
5 | Handbrake available on grade | 25% | ||
6 | Max grade ability | 25% | ||
7 | Distance of road after brake | ≤2.5m with load and speed 10km/h | ||
8 | Minimum turn radius | 4.5 m | ||
9 | Ground clearance | 248 mm | ||
10 | Noise level | ≤106 db(A) | ||
11 | Loading discharge angle | 48.4 | ||
12 | Time of discharge | 8 s | ||
13 | Hydraulic pressure | 16 Mpa | ||
14 | Wheel base | 2000 mm | ||
15 | Wheel tread | 1580 mm | ||
16 | Engine power | 92KW OR 97KW | ||
17 | Dimensions (L x W x H) | 7300X2400X3630MM | ||
B. Engine | ||||
1 | Model/Maker | DEUTZ TD226B or CUMMINS engine | ||
2 | Type | Diesel 6 cylinders direct fuel injection, water cooled | ||
3 | Rated Power | 92KW or 97KW | ||
4 | Speed | 2400 R/Min | ||
C. Drive System | ||||
1 | Brand | JINGYI | ||
2 | Transmission: | Power shift 4Forward and 2 reverse gears | ||
3 | Drive shaft: | Tubular-type, open-type, rigid needle-bearing universal joint | ||
4 | Driving axle: | Main drive type: single-stage hyperbolical bevel gear dive | ||
D. Frame | ||||
1 | Frame: | Channel steel welding type, two-section articulated connection | ||
2 | Tire: | 17.5-25 | ||
E. Steering system | ||||
1 | Type | Control by wheel, full hydraulic system, two cylinders double acting. | ||
2 | Angle steering each direction | ± 350 | ||
F. Bake system | ||||
1 | Operating brake | Hydraulic shoe system, four-wheel brake | ||
2 | Handbrake | mechanically-pirated central sport-type disc | ||
G. Hydraulic system | ||||
1 | Hydraulic pump: | Gear pump |