MR-J4-200A Mitsubishi MR-J4 Servomotors and Amplifiers Servo Drive

MR-J4-200A Mitsubishi MR-J4 Servomotors and Amplifiers Servo Drive

Negotiable

Min.Order:1

Supply Ability:
1000 per Month
Payment Terms:
T/T Credit Card

Guangzhou Hongsen Servo Motor Co., Ltd.

Business Type: Manufacturer
Main Products: , , ,

Product Details

Product Overview

MR-J4 Servomotors and Amplifiers

With a capacity range of 50W to 7kW (200V only), both the amplifier and motor size is reduced. We added a high resolution encoder of 4 million pulse/rev, with a speed frequency response of 2500Hz. Additional fetures include advanced one-touch auto tuning and advanced vibration suppression control II functions. The MR-J4 motors ahve the same flance size as J3 notors with the lenght of the motor bing the same or smaller than the J3.The same cables for power, encoder and brake can be used for the MR-J3 and MR-J4. MR-J4 Series has four models: MR-J4A (analog/pulse train),MR-J4B, (SSCNET III/H), MR-J4W2B (Dual axis amplifier with SSCNET III/H) and ME-J4W3B (Three axis in one amplifier with SSCNET III/H). In addition, MR-J4 has three motor models available: HG-KR similar to HF-KP, HG-MR similar to HF-MP, and HG-SR similar to HF-SP Series. M-Size software is used to size HG Series motors and setup is made easy using MR-Configurator.
PRODUCT SPECIFICATIONS
Servo Amplifier Model
MR-J4-200A
    
Output
Rated Voltage
3-phase 170 VAC
Rated Current (A)
11



Main Circuit                
Power  Supply
Voltage/Frequency
3-phase or 1-phase 200 VAC to 240 VAC, 50/60 Hz
Rated Current (A)
10.5
Permissible Voltage Fluctuation
3-phase or 1-phase 170 VAC to 264 VAC
Permissible Frequency Fluctuation
±5% maximum



Control Circuit
Power Supply
Voltage/Frequency
1-phase 200 VAC to 240 VAC, 50/60 Hz
Rated Current (A)
0.2
Permissible Voltage Fluctuation
1-phase 170 VAC to 264 VAC
Permissible Frequency Fluctuation
±5% maximum
Power Consumption (W)
30
Interface Power Supply
24 VDC ±10% (required current capacity: 0.3 A (including CN8 connector signal))
Load-Side Encoder Interface
Mitsubishi high-speed serial communication
Tolerable Regenerative Power of the Built-in Regenerative Resistor
100w
Control Method
Sine-wave PWM control/current control method
Dynamic Brake
Built-in

Protective Functions
Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection,encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection
Fully Closed Loop Control
Available in the future
Safety Function
STO (IEC/EN 61800-5-2)




Safety Performance
Standards Certified by CB
EN ISO 13849-1 Category 3 PL d, EN 61508 SIL 2, EN 62061 SIL CL 2, EN 61800-5-2 SIL 2
Response Performance
8 ms or less (STO input OFF — energy shut-off)
Test Pulse Input (STO)
Test pulse frequency: 1 Hz to 25 Hz; Test pulse off time: 1 ms maximum
Mean Time to Dangerous Failure (MTTFd)
100 years
Average Diagnostic Coverage (DCavg)
90%
Probability of Dangerous Failure Per Hour (PFH)
1.01 × 10 -7 [1/h]
Communication Function
USB: Connect a personal computer (MR Configurator2 compatible)

Compliance to Standards
CE Marking : LVD: EN 61800-5-1; EMC: EN 61800-3; MD: EN ISO 13849-1, EN 61800-5-2, EN 62061
UL Standard : UL 508C
Structure (IP Rating)
Natural cooling, open (IP20)
Close Mounting
Possible
Packing & Delivery

Packing Details  : 1pcs/carton

Delivery Details : 1-2 days after order confrimed

Contact Supplier

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Mechanical Parts & Fabrication Services > Motor > AC Motor
Categories
Hi~