SICK Optic Sensor LUT3-850 Sick Luminescence sensors
Negotiable
Min.Order:1
SICK Optic Sensor LUT3-850 Sick Luminescence sensors with best quality&competitive price&best service
Luminescense Scanner LUT3-850 NPN,PNP switching output, scanning distance 50 mm off-delay, analogue output plug M 12, 5pin
Features | |
Dimensions (L x W x H): | 80 mm x 30.4 mm x 53 mm |
Sensing distance 1): | 50 mm |
Light source 2) 3): | UV-LED |
Light spot size: | 5 mm x 15 mm |
Receiving filters: | KV 418 (standard) |
Receiving range: | 450 nm ... 750 nm |
Adjustment: | Manual (potentiometer) |
Output function: | Light switching |
1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 °C 3) Wave length: 375 nm | |
Mechanics/electronics | |
Supply voltage Vs 1): | DC 12 V ... 30 V |
Ripple 2): | < 2 Vpp |
Power consumption 3): | < 60 mA |
Switching frequency 4): | 1.5 kHz |
Response time 5): | 350 µs |
Switching output: | PNP: HIGH = VS- ≤ 3 V / LOW = approx. 0 V NPN: HIGH = approx. VS / LOW ≤ 2 V |
Switching mode: | PNP/NPN |
Output current Imax.: | 100 mA |
Connection type: | Connector M12, 5-pin |
Protection class 6): | II |
Circuit protection: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
Enclosure rating: | IP 67 |
Weight: | Ca. 400 g |
Housing material: | Zinc diecast |
1) Limit values: operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) Reference voltage DC 50 V |
Brisynergy specializes in providing automation equipment products
Main products:
PLC, Servo Motor, Inverter, HMI, Sensor and others
Main products:
Mitsubishi, Fuji, Yaskawa,Panasonic, Siemens, Omron, Allen Bradley, Proface, ABB and others
Ms Dora (Sales Manager) Skype: brisynergy03