Panasonic, buy Panasonic sensor AFP7CPS21 New items on China Suppliers Mobile

Product Details

Product Description

Panasonic sensor AFP7CPS21 New

Item	Specifications
Product Number	AFP7CPS21
Part Number	AFP7CPS21

Control specifications

Item	Specifications
Memory capacity:Memory selection pattern1	Program (steps)(Note) : 64,000 Data register (words)(Note) : 131,072 Number of max. program block (PB) : 128 (Note) The factory default setting is pattern 1. (Note) For data register (DT), data up to 262,144 words can be backed up.
Memory capacity:Memory selection pattern2	Program (steps)(Note) : 32,000 Data register (words)(Note) : 262,144 Number of max. program block (PB) : 64 (Note1) For data register (DT), data up to 262,144 words can be backed up.
Programming method	Relay symbol method
Control method	Cyclic operation method
Program memory	Built-in flash ROM (no backup battery required)
Operation speed	Basic instruction: min. 14 ns/step
External input (X)	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
External output (Y)	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
Internal relay (R)	32,768 points
System relay (SR)	Indicate operation status of various relays is shown.
Link relay (L)	16,384 points
Timer (T)	4,096 points: Timer capable of counting (units: 10 μs, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295
Counter (C)	1,024 points, Counter capable of counting 1 to 4,294,967,295
Link data register (LD)	16,384 words
System data register (SD)	Internal operation status of various registers is shown.
Index register (I0 to IE)	15 long words / With switching function
Master control relay (MCR)	Unlimited
Number of labels (LOOP)	Max. 65,535 points for each program block (PB)
Differential points	Unlimited
Number of step ladders	Unlimited
Number of subroutines	Max. 65,535 points for each program block (PB)
Number of interrupt program	1 periodical interrupt program
Constant scan	Available (0 to 125 ms)
Real time clock	Built in. Date backup with battery. (Note) Precision of calendar; At 0 ℃ 32 ℉, less than 95 seconds error per month, At 25 ℃ 77 ℉, less than 15 seconds error per month, At 55 ℃ 131 ℉, less than 130 seconds error per month.
PLC link function	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)

Communication specifications for COM port

Item	Specifications
Interface	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.
Transmission distance	15 m 49 ft
Transmission speed	300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec,
Communication method	Half-duplex system
Synchronous method	Start-stop synchronization system
Transmission format	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX
Data transmission order	Transmit from bit 0 in character units.
Connection	General-purpose communication, Computer link and MODBUS-RTU

Dedicated power supply output port specifications for GT series programmable display

Item	Specifications
Terminal:5V	For 5 V DC type GT series Programmable Display

Common general specifications

Item	Specifications
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, at storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at 25 ℃ 77 ℉, no condensation), at storage: 10 to 95 % RH (at 25 ℃ 77 ℉, no condensation)
Breakdown voltage	500 V AC for 1 minute
Insulation resistance	100 MΩ or more (at 500 V DC)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

Individual general specifications

Item	Specifications
Rated voltage range	20.4 to 28.8 V DC
Current consumption	150 mA or less
Net weight	180 g approx. (with terminal block and end unit)

Packaging & Shipping

Packaging:

Standard export package

Shipping:

We ship worldwide. We partnership with capable logistics company with broad experience in exporting & importing.
We will guide all our clients for shipping and our shipping rate also competitive. Clients also allowed to arrange their own shipment. We do shipping almost every day with efficiency.

Product Overviews