Product Description
This product was developed based on the imported equipment in 1992 and has been placed on the list of the "Sin-tech Spark Project of Zhejiang”. In 1995, this product passed the provincial level technical appraisal of new product, was awarded the "Wenzhou Scientific and Technological Improvement Award" and also recommended as the "Brand-name and Quality High-tech Product of Zhejiang" and "National New Product of 1996". And it has been exported to such regions as Europe, Australia and Southeast Asia, etc. and can be used for coating various tablets, pills and sweets with organic film, water-soluble film and sugar film, etc. And it has such characteristics as high efficiency, low energy consumption and small floor area, etc. And it can be widely used for coating various tablets, pills and sweets with organic film, water-soluble film and sugar film etc. In such fields as of pharmaceutical, food and biological products etc.
And it has such characteristics as good appearance in design ,high efficiency, low energy consumption and small floor area, etc.
The tablets make complicated and constant track movement with easy and smooth turning and frequent exchanging in the clean and closed rotational cylinder of the film coating machine. And it can automatically spray coating medium according to the process flow and reasonable process parameters. The hot air exhausted through the bottom of the tablets under the effect of air exhaust and negative pressure so as to make coating medium dry quickly on the surfaces of the tablets and form a firm, fine and close and smooth surface film.
Technical Parameters
Items Model | BG-40 | Air heater temp.-adjust range | ~ 80 ℃ |
Max. tablet volume | 40Kg / time | Hot air cleanness | 100000 level |
Sugar coating drum dia. | F820mm | Peristaltic pump or lobe pump motor power | 0.37kw (0.55kw) |
Feed inlet dia | F340mm | Silicon rubber hose | F 9~16mm |
Sugar coating drum speed | 2-18 r.p.m | External dimensions of host machine | 1200*900*1570mm |
Host machine motor power | 1.1 kw | Host machine weight | 600㎏ |
Exhaust cabinet motor power | 2.2 kw | External dimensions of hot air cabinet | 900x900x2000mm |
Exhaust blower air flow | 5268 m3/h | Hot air cabinet weight | 45KG |
Hot air cabinet motor power | 1.1 kw | External dimensions of exhaust cabinet | 910x910x1700mm |
Air heater air flow | 1685 m3/h | Exhaust cabinet weight | 500㎏ |
If you are interested in the line,you can contact us~
Product Details
Agitating and holding tank
Outboard discharging device
Built in discharging device
Spray Gun with Brand “Germany Duesen-schlick”
CIP System
Drainage of water trough
Main Machine | During run of film coating in the main machine, it shows such features as free dust flyoff, syrup splash, operation condition improvement, little cross contamination to tablets, simple coating process, shorting coating time as well as high production efficiency etc. Adopts a new-type micro-computer PLC, by which temperature and negative pressure control system are displayed on the touch screen, with such characteristics as programmability, automatic adjustment of negative pressure and airflow, datamation of process parameters, making accurate production of various batches of products with the same technical parameter. It make lead at home in data storage and printing system, by which process parameter and process flow of each batch of production can be accurately recorded with a printer as requested from users. The explosion-proof motor drives the drum to rotate in the clockwise direction through the cycloidal pinwheel, It's attached with a cleaning system and equipped an are outlet adjustment apparatus, with which a few medicines can be coated in |
Hot Air Cabinet | ②At first, air inhaled in through the centrifugal fan should be purified up to the 100,000 Level after three times filtration, involving primary filtration, medium filtration and high filtration, then be blown to the drum of main machine through the (steam or electrothermal) heat exchanger. Equipped with a vibration damper, it is in normal run with noise lower than 70 dB. |
Hot Exhaust Cabinet | ③Used for pumping air out of drum (including dust absorption), keeping the working area under negative pressure, dust abatement and filtration. Equipped with a vibration damper, it is in normal run with noise lower than 70 dB. |
Air Spraying System | High-pressure uniform vaporized liquid can be sprayed through the crawler pump and the air spray gun imported from Japan. |
Thermostatic Mixing drum | ④The mediums can be electrically heated and stirred into a uniform liquid at a preset temperature. |
Application Products
Related Products
After Sales Service
Installation and after sales service:
Installing and Commission: We will install and test the machine in best working condition before shipment. Ifcustomer requires our technician to adjusting the machine and train technician at arrival place, we will send technician there. All our expenses including round-trip air ticket to the nearest airport, local conveyance to your factory, Lodging & Boarding expenses shall be payable by you. In case the stay of our technician, the service charges US $ 50 per day will be charged extra.
Warranty Period: There is five year for fully machine guarantee. And in this year if the machine broken caused by Mechanical problem, all of the spare part is free. The service of the machine all though the machine’s life.
After sales service: 1. we have seven technicians who gets passport ready to travel all over world to offer service to you.
2. We have 24hours hot line for Technical Support.
3. We get 18hours internet line for technical support.
4. Video camera in workshop to help you adjust and solve machine problem in working situation.
Company Introduction
Q: What price terms you offer?
A: We can offer FOB, FCA, CFR, CIF, EXW and other price terms based on your request.
Q: What payment terms you take?
A: TT, LC, other terms are also workable.
Q: Will you help with installation and stuff training?
A: Yes,we can send our engineers to your place to guide the installation and train your workers if you need, but the buyer should bear our technician's round tickets, accomodation, food and subsidiary USD100/day.
Q: How can I visit your factory?
A: Our factory is located in Ruian city Zhejiang Province.
Just let us know your schedule in advance and we will arrange everything for you!
Any other doubts about our machine, please feel easy to contact with us.