Factory direct sells ZLPG Spray Dryer for Chinese Traditional Medicine Extract
Product introduction
Descriptions:
The machine adopts full seal from. All parts are made of stainless steel. It is equipped with three grades of filter. The filtered air is one hundred thousand grades. The cooling device of wall is installed at the cylinder body. It makes the wall temperature less than 80℃.Air sweeping device is installed inside the drying tower. The product will not be burnt or deteriorated even stays on the way. The collection rate of powder is raised greatly. Moreover will not cause medicine mixed or wall stick.
Basic Principle: high-speed centrifuge atomizing for the extract of traditional Chinese medicine is an application of centrifuge atomizing technique. It is an high-speed atomizing dryer. The following problems are solved.
1. Raw material is stick to the wall and the rate of powder collecting is low.
2. Because the staying time of raw material at wall is long, the phenomenon of burnt and degeneration can be produced.
3. It is difficult to clean and can not meet the requirement of GMP.
4. Low in output: Model LPG-150 atomizing centrifuge dryer can process 50-60kg/h of raw material liquid. In view of this, according to the properties and process requirements of the extract of traditional Chinese medicine, our factory researched and designed the special dryer for the extract of traditional Chinese medicine and won items of china patent. It solves the historical difficult problems in drying the extract of traditional Chinese medicine. The color of dried raw material is good. The dried raw material does not degenerate. It raises the economic benefit greatly. Compared to ordinary LPG high-speed atomizing dryer, it has the following features:
(1).Adopted three-grade air filter, the inlet air is one hundred thousand grade.
(2).Adopted wall cooling device, the temperature of inner wall will be on more than 80℃.Even if raw material is stayed on the wall, it will not be burnt.
(3).Its whole volume is 3.5 times of standard LPG high-speed atomizing dryer.
(4).Adopted quick washing device, it is can meet the requirements of production for varieties if products.
(5).Adopted wet-dedusting, there is no powder dust out. It is in conformity with the requirements of GMP.
(6).Adopted air sweeping device, the clean effect is satisfied.
(7).Equipped with two sets of atomizer and adopted frequency inverter control.
(8).Adopted PLC control and display, and adapted frequency control.
(9).Equipped with washing device on request.
(10).Adopted the seal transport by dry air on request.
Features:
1. Tower body has air cooled jacket.
2. Tower body is equipped with automatic vibration device.
3. Tower body and pipe line have cleaning hole and sewage discharge hole that can open quickly.
4. Thermostat feeding tank on request.
5. Manual high pressure washing machine on request.
6. The parts that can contact raw material are made of stainless steel (all entirely stainless steel).
7. The collecting of raw material adopts two grades cyclone or one-grade cyclone and one-grade wet-method-deduster.
8. The temperature of inlet air can be controlled automatically and continuously.
9. Equipped with air sweeping device on request.
Technical parameters:
|
Spec |
ZLPG-25 |
ZLPG-50 |
ZLPG-80 |
ZLPG-100 |
ZLPG-150 |
ZLPG-200 |
ZLPG-300 |
||
|
Evaporation capacity(kg/h) |
25 |
50 |
80 |
100 |
150 |
200 |
300 |
||
|
Process amount of material liquid(kg/h) |
25-34 |
50-68 |
80-108 |
100-135 |
150-203 |
200-270 |
300-406 |
||
|
Output of finished product(kg/h) |
4.8-7.2 |
9.2-14 |
14.8-22.4 |
18.4-28 |
28-42 |
36.8-56.4 |
55-85 |
||
|
Solid content of material liquid(%) |
18-25 |
||||||||
|
Moisture content of finished product(%) |
3-5 |
||||||||
|
Electric powder(kw) |
63 |
99 |
132 |
153 |
204 |
246 |
330 |
||
|
Heat source |
steam plus electricity |
||||||||
|
Collecting method of product and its efficiency |
two-grade cyclone or one-grade cyclone and one-grade web-method dedusted of 95% |
||||||||
|
Automatic control meters and instruments |
indicator of not air and exhaust air temperature |
||||||||
|
Temperature of air inlet(℃) |
150-200 |
||||||||
|
Temperature of air outlet(℃) |
80-100 |
||||||||
|
Overall dimensions(mm) |
L |
7000 |
8000 |
9800 |
11000 |
12200 |
14100 |
15000 |
|
|
W |
4000 |
5000 |
5700 |
6200 |
7000 |
7800 |
9000 |
||
|
H |
6900 |
7400 |
8000 |
8900 |
10000 |
11000 |
12000 |
||
Our factory is located in Zhenglu Industrial Park, Changzhou City, Jiangsu Province, China. It’s only 3 kilometers from downtown and it tightly close to east-ring elevated road of Changzhou and Hengshanqiao Exit of Shanghai-Nanjing Expressway.
Our company owns a 12000m2 composite comprehensive office building, for the 2 large-scale modern machinery heavy-duty manufacturing workshop which covers an area of 8000 square meters are equipped with sheet metal cold processing equipment, 80 sets of welding machine and other special processing machines. We have abundant technical force: a number of top professional talent which have above 15 years professional experience in drying industry engaged in design, mechanical drawing, electrical automation edit etc. We actively participate in international market competition.
1. Engineers available to service machinery overseas (All counties)
2. Overseas service center available (some countries)
3. Overseas third-party support available (some countries)
Packaging & shipping
All the machine for the spare parts are packed in 20GP, 40GP, 40HQ.
Shipping to Shanghai seaport or CIF destination port.
i. Our company shall delegate one team consists of one chief installers and one or two assistants for supervising the installation on the Buyer’s written request.
ii. Our company shall delegate one processor (or/and one electrician) for the commissioning and instruction of the Buyer's personnel on the Buyer’s written request.
We can offer 24hrs online service:
WeChat/WhatsApp: +86-13915098637
Skype ID: merrymiao37