Recommend Products
Products Description
The machine is new product which is improved based on customer’s requirements. It’s suitable for packaging of all kinds of liquid and solid in large & medium pharmaceutical factory, health medicine factory, hospital preparation lab, food industry, electronic industry, hardware industry, etc. It can protect the material from steam or dust, improve product packing degree, and increase the additional value. The machine is used to produce large quality and single product.
Product Name | DPP-320 Automatic Blister Packing Machine | ||||||
Blanking frequency (sheets): | 15-60 | ||||||
Sheet's quantity of one blanking (sheets): | 1-6 | ||||||
Capacity (sheets/hour): | 1800-18,400 | ||||||
Adjustable scope of feed travel: (mm) | 10-160 | ||||||
Max Forming area and depth (mm) PVC (For medicine): | 340×120×25 | ||||||
Capacity of air compressor(m3/min): | ≥0.36 | ||||||
Power supply (KW): | 380V 50Hz Three phase | ||||||
Wrapper specification (mm): | PVC for medicine 340× (0.15-0.5) mm Aluminum film 340× (0.02-0.035) mm | ||||||
Weight (kg): | 2100Kg |
1.Travel scope can be adjusted.
2.Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.
3.The material is fed automatically. The mould and feeder can be designed as user’s requirements.
4.Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.
5.Adopt the equipment of trace pressing, batch number printing and scarp-collecting.
6.Stepping motor drives and tow materials.
7.The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.
2.Mould is located by locating groove which makes it easy to change mould. The machine heats the PVC through conduction and forms it through pressing and frothing.
3.The material is fed automatically. The mould and feeder can be designed as user’s requirements.
4.Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately.
5.Adopt the equipment of trace pressing, batch number printing and scarp-collecting.
6.Stepping motor drives and tow materials.
7.The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life.
Details Images
Plastic preheating and unwind
Plastic blister forming station
Brash feeder
Aluminum and plastic sealing station
Step motor for towing material
Aluminum plastic blister cutting station
Electronic box and color point sensor
Company Profile