Foot Accelerator Pedal, buy Potentiometer Throttle (Foot Pedal) Speed Signal Device (5-Wire Pot Throttle) EFP-005 on China Suppliers Mobile

Product Details

Potentiometer Throttle (Foot Pedal) Speed Signal Device (5-Wire Pot Throttle) EFP-005

Product Description

Specifications:

* The foot pedal could be installed at both ends of rotating shaft
* Signal output: 0-5KΩ ± 0.1KΩ (BI potentiometer P270-033B)
* Solid metal case, ingress protection: IP55
* Installation kit is included: bolts, nuts and washes
* Mating connector is included
* Net weight: 1.20 kg (with installation kit and mating connector)

Product Name	Foot pedal
Ingress protection	IP55
Mechnical lifespan	1,000,000 times
Package	Carton

Product performance description

* Model: EFP-005, working with CURTIS 1204M-4201 Series Motor Controller, CURTIS 1268-5403 SepEx Motor Controller and other
CURTIS controllers
* Switch on/off signal: 0V - power supply voltage
* Operation temperature range: -55℃ –120℃
* Storage temperature range: -40°C - 80°C
* Ingress protection: IP55
* Mechnical lifespan: 1,000,000 times
* Installation kit is included: bolts, nuts and washes
* Mating connector is included
* Mechnical lifespan: 1,000,000 times

Features Include:

About the throttle switch:
Most electric vehicle throttles have a throttle switch. Depending on the application requirement, the throttle switch can be used
for different purposes:
* Main contactor control: feeding power to main contactor's control coil.
* Forward / Reverse DC contactor interlock: feeding power to F / R switch through the throttle switch. The F / R contactor will
only be activated when the throttle switch is "ON" (for avoiding accidental vehicle movement in case that the F / R switch is
not at neutral position when key switch is turned on).
* Lifting / Lowering interlock: when forklift is in accelerating mode, the lifting or lowering function will be inhibited, for
avoiding unsafe operation.
* Accelating alarm: sending signal to a display device (for example a lamp) for showing the accelerating status of vehicle.
* Etc.
For 0-5KΩ throttle model EFP-005, you may choose a power source of variable DC voltage to control other devices through its
internal switch. For example, your vehicle battery voltage is 48V, but you have a forward / reverse contactor of control coil
rated for 12VDC, then you may use a 48V to 12V DC-DC converter to feed the 12VDC power to F / R switch through the throttle
switch, for controlling the F / R contactor.
Caution: we don't recommend to apply a voltage which is higher than the voltage rate of main power source (vehicle battery) to the
throttle switch.

Wiring instruction, mating connector & diagram:

Details Images

Overview:
The foot pedal throttle EFP-005 is a 0-5KΩ potentiometer throttle (3-wire pot throttle), is widely used in forklift (typical
application: HANGCHA), golf cart and other electric mobility vehicles.

Related Products

Company Introduction

Hefei Huanxin Technology Develop Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004. We abide by the motto of First-class quality, Reasonable price, Best service and Professional product support.

Certifications

Packing&Shipping

Package:Normally we use the standard exporting packaging. We also can according to clients request .

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer’s destination city air port.
3. By Sea: Delivery from the Shanghai sea port .

FAQ

Q1.
Can I have a sample order?
A: yes, we welcome sample order to test and check quality.

Q2. What about the lead time?
A: Sample needs 3-5 days.

Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.

Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%