With the large contact (almost the same size as the contact of 200A contactor SW180 / SW180B), SW80-164L is suitable for high
initial load application, for example the pump driver / engine starter.
Overview
The SW80 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks, and
telecom and power distribution applications. Developed for both interrupted and uninterrupted loads, the SW80 is suitable for
switching Resistive, Capacitive and Inductive loads.
* Interrupted current: opening and closing on load with frequent switching (results in increased contact resistance)
* Uninterrupted current: no or infrequent load switching requirements (maintains a lower contact resistance)
The SW80 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and
have excellent conductivity. The SW80 has M8 stud main terminals and 6.3 mm spade coil connections. Mounting is via M4 tapped
holes or mounting brackets, either supplied fitted, or as separate items. Mounting can be horizontal or vertical, when vertical
the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to
compensate for this.
Specifications:
* Model: SW80-164L
* Working voltage: 24V
* Large contact for heavy duty application
* Ambient temperature: –40°C ~ +60°C
* With mounting bracket
* 6.3 mm (0.25" or 1/4") spade terminals for coil connections
* Net weight: 0.40 kg