DC Motor Type Curtis Motor Controller 600A
Overview
The CURTIS 1253 provides a cost-effective solution for control of high power DC series-wound hydraulic pump motors. Its system integration features are designed primarily for Class I and Class II material handling vehicles. Typical applications include the pump systems of material handling trucks (counterbalance trucks, reach trucks), aerial lift platforms (scissor lifts, articulating/telescoping booms), and other industrial vehicles.
The 1253 accepts inputs from up to four Speed Select switches and also from an analog throttle. Its internal microprocessor-based logic controller provides maximum flexibility at minimum cost. Its performance characteristics can be tailored through an array of programmable parameters.
The 1253 controller is fully programmable through a CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programming device provides diagnostic and test capability in addition to configuration flexibility.
Key Features
CURTIS Model: 1253-4804
Norminal Battery Voltage (Volts): 48V
Amature Current Limit (amps): 600
Programmable Undervoltage Cutback (Volts): 32-42
Overvoltage Cutoff (Volts): 60
PWM operating frequency: 15.6 kHz
Electrical isolation to heatsink (min.): 500 VAC
KSI input voltage: 28–60V DC
KSI input current (no contactors engaged):
60 mA without programmer
130 mA with programmer
Logic input current: < 1 mA
Status LED output current (max.): < 2 mA
Heatsink overtemperature cutback: linear cutback starts at 80°C; complete cutoff at 120°C
Heatsink undertemperature cutback: 50% current below -25°C
Operating ambient temperature range: -40°C to 50°C
Storage ambient temperature range: -40°C to 85°C
Package environmental rating: IP54
Throttle Type: 0-5KΩ (default setting), 5K-0Ω, 0-5V or single-ended 3-wire potentiometer (1kΩ to 10kΩ range)
Dimensions: L196xW146xH77 mm
Features include:
Smooth and Quiet Control
Programmable acceleration rates provide smooth application of pump motor torque.
15.6 kHz PWM frequency for near-silent operation.
Programmable Flexibility
Easily programmable through a CURTIS programming device.
Four Speed Select inputs (SS1.SS4) with individually programmable top speeds.
Programmable throttle input for precise speed control with a variety of signal sources.
Programmable turn-off delay allows SS4 to be used for power steering.
Adjustable minimum speed setting to ensure pump lubrication and to maintain steering system pressure.
Robust Safety and Reliability
Interlock feature disables the controller when operator is not present.
Programmable startup lockout prevents inadvertent operation.
Seamless integration with CURTIS gauges (models 803, 841, 906, and enGage. IV) for lift lockout function.
Lift lockout disables the controller at low battery state of charge.
Redundant watchdog timer circuits ensure proper software operation.
External Status LED output for easy troubleshooting.
Short-circuit protection on main contactor driver.
Precharge control prevents pitting of contactor tips at startup.
Thermal cutback provides protection to the controller.
Rugged housing meets IP54 environmental ratings.
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
our service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%. be less