Overview:
CURTIS PMC 1207B programmable motor speed controllers are the latest upgraded version of popular 1207A controllers. The CURTIS 1207B programmable motor speed controller provides efficient, cost-effective, and simple-to-install control for a variety of small electric vehicles. Typical applications include walkie fork/pallet trucks, mini personnel carriers, and sweepers. The microprocessor-based logic section combined with a proven MOSFET power section gives the 1207B controller high power and advanced features in a simple, compact package.
The CURTIS programmers (Model 1313-4331 Handheld Programmer or 1314 PC Programming Station with 1309 USB Interface) enable the user to set parameters, conduct tests, and obtain diagnostic information quickly and easily.
Key Features:
CURTIS Model: 1207B-5101
Norminal Battery Voltage (Volts): 24V
Maximum operating voltage: 30 V
Overvoltage point 33 V
Minimm operating voltage: 16 V (= undervoltage point)
Contactor voltage: 24 V
Contactor current (maximum): 1 amp (current limit at 2 amps)
Contactor coil spike protection: internal diode to brake; internal diode from brake to KSI
Shunt driver current (maximum): 2 amps
Shunt driver spike protection: active clamp at 47 V
1 Minute Current Rating (amps): 300
2 Minute Current Rating (amps): 210
5 Minute Current Rating (amps): 160
1 Hour Current Rating (amps): 110
Throttle Type: 0-5K Ω (default setting), 5K-0 Ω or 0-5V
Dimensions: L122xW165xH66 mm
Features Include:
Power MOSFET design, providing
infinitely variable drive and plug brake control
silent high-frequency operation
high efficiency (for reduced motor and battery losses)
Compact size
Overvoltage and undervoltage protection
Thermal protection and compensation circuitry provides undertemperature cutback, constant current limit, and linear rollback in overtemperature - thus preventing sudden power loss regardless of thermal conditions
CURTIS 1313-4331 Handheld Programmer (optional) provides a full set of parameter and function settings, as does the CURTIS 1314 PC Programming Station (optional)
Diagnostic and test information for the controller - and other system components - readily available both on-board and through the programmer
On-board potentiometers allow direct manual adjustment of acceleration rate, creep speed, maximum speed, plug current, and main current limit (1207 single-mode models only)
Circuitry and software detects faults in the throttle circuit, MOSFET drive circuit, MOSFET transistors, contactor drivers, and contactors - ensuring that the controller meets EEC fault detect requirements
Input sequencing options include neutral start and static return to off (SRO)
Microprocessor-controlled contactor sequencing provides true arcless contactor switching
Smooth, controlled plug braking - with either variable (throttle-dependent) or fixed plug current limit
Neutral braking option provides automatic plug braking in neutral
MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
Emergency reverse (belly button switch) with a single input Ramp-start feature provides full power for starting on ramps
Simple contactor and switch wiring, with coil drivers monitored for faults - thus ensuring fail-safe operation
Flexible throttle circuitry accommodates a variety of throttle types
Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
Connections made by solid copper power busses with a polarized Molex connector for control signals
Solid, well-protected construction - with an aluminum mounting plate and injection-molded cover.
specifications:
Nominal input voltage: 24 V
PWM operating frequency: 15 kHz
Electrical isolation to heatsink (min.): 500 VAC
KSI input voltage: 16 – 30 V
KSI input current (typical):
80 mA without programmer
130 mA with programmer
Logic input current (typical): 10 mA at 24 V
Logic input threshold: 8 V
Ambient operating temperature range: -25°C to 50°C
Heatsink overtemperature cutback: 85°C
Heatsink undertemperature cutback: -25°C
Package: splash resistant
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
our service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
Q1. What is your terms of packing?
A: Generally, we pack our goods in paper package and Iron pallet.
We can pack the goods in your branded boxes after getting your authorization letters.
. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance. Or As negotiated
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 5 to 30 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q6: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.