Products Description
* PWM operating frequency | 15 kHz | ||||||
* Electrical isolation to heatsink (min.) | 500 VAC | ||||||
* PWM operating frequency | 10 kHz | ||||||
* Maximum encoder frequency | 15 kHz | ||||||
It is supposed that the CURTIS AC Controller need to be programmed before applying to a specific application. For the buyer without AC MOTOR CONTROLLER PROGRAMMING EXPERIENCE, please consult your cart/motor dealer and read carefully the CURTIS 1238 AC
Motor Controller Datasheet before making your purchase.
As a professional supplier, we possess OEM programs (controller settings) of certain utility vehicles and forklifts. Buyers may contact us and send us the vehicle (forklift) information (manufacturer, model, year of production, etc.), for knowing if we can provide the controller with its OEM program. This 1238E-6501 can also be programmed by CURTIS CURTIS Model 1313-4331 Handheld Programmer or CURTIS 1314 PC programming station. There is no extra cost for reprogramming the controller.
Motor Controller Datasheet before making your purchase.
As a professional supplier, we possess OEM programs (controller settings) of certain utility vehicles and forklifts. Buyers may contact us and send us the vehicle (forklift) information (manufacturer, model, year of production, etc.), for knowing if we can provide the controller with its OEM program. This 1238E-6501 can also be programmed by CURTIS CURTIS Model 1313-4331 Handheld Programmer or CURTIS 1314 PC programming station. There is no extra cost for reprogramming the controller.
Overview:
CURTIS 1238 AC induction motor controllers deliver smooth power unlike any previous vehicle control system. They provide unprecedented flexibility and power through inclusion of a field-programmable logic controller embedded in a state-of-the-art motor controller.
The embedded logic controller runs a fully functional field-oriented AC motor control operating system (OS) that can be user-tailored via parameter modification. The OS also contains logic to execute OEMdeveloped software, called VCL, that can be used to enhance the controller capabilities beyond the basics. VCL (Vehicle Control Language) is an innovative software programming language developed by CURTIS. Many electric vehicle functions
are uniquely built into the VCL code, and additional functions can be OEM-controlled using VCL code. VCL opens new avenues of customization, product differentiation, and responsiveness to the market.
The CAN bus communications included in the 1238, as well as in many other CURTIS products, allow these AC induction motor controllers to be part of an efficient distributed system. Inputs and outputs can be optimally shared throughout the system, minimizing wiring and creating integrated functions that often reduce the cost of the system. CURTIS 1238 controllers are the
ideal solution for traction, hoist, dual drive, and other motor drive and vehicle control needs.
The 1238 controllers are fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programmer provides diagnostic and test capability in addition to configuration flexibility.
CURTIS 1238 AC induction motor controllers deliver smooth power unlike any previous vehicle control system. They provide unprecedented flexibility and power through inclusion of a field-programmable logic controller embedded in a state-of-the-art motor controller.
The embedded logic controller runs a fully functional field-oriented AC motor control operating system (OS) that can be user-tailored via parameter modification. The OS also contains logic to execute OEMdeveloped software, called VCL, that can be used to enhance the controller capabilities beyond the basics. VCL (Vehicle Control Language) is an innovative software programming language developed by CURTIS. Many electric vehicle functions
are uniquely built into the VCL code, and additional functions can be OEM-controlled using VCL code. VCL opens new avenues of customization, product differentiation, and responsiveness to the market.
The CAN bus communications included in the 1238, as well as in many other CURTIS products, allow these AC induction motor controllers to be part of an efficient distributed system. Inputs and outputs can be optimally shared throughout the system, minimizing wiring and creating integrated functions that often reduce the cost of the system. CURTIS 1238 controllers are the
ideal solution for traction, hoist, dual drive, and other motor drive and vehicle control needs.
The 1238 controllers are fully programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station. The programmer provides diagnostic and test capability in addition to configuration flexibility.
Key Features:
* Increased Performance, Improved functionality * Higher performance form, fit and functional replacements for earlier CURTIS
Model 1238 AC controllers.
* CE marked as a programmable safety device under EN ISO 13849-1.
* Models available for 550 output at 48-84V system voltages. These are true 2
minute RMS ratings, not short duration ‘boost’ ratings.
* Enhanced 64MHz micro and additional FLASH memory doubles the available VCL code
space and provides more than twice the VCL execution speed.
* Six additional VCL-configurable CAN "mailboxes" significantly increases CAN
master capabilities.
* Advanced Pulse Width Modulation techniques produce low motor harmonics, low
torque ripple and minimized heating losses, resulting in high efficiency.
* Unmatched Flexibility * Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
* Programmable for either traction or pump applications.
* Field upgradeable software.
* Integrated Battery state-of-charge algorithm and hour meter.
* Fully-featured generic software and VCL for typical Warehouse Truck applications is included.
* Comprehensive programming options and VCL allow other applications to be easily supported.
* CURTIS hand-held or PC Windows programming tools provide easy programming and powerful system
diagnostic tools.
* Integrated status LED provides instant diagnostic indication.
* Robust Safety and Reliability * Dual Microprocessor architecture cross-checks critical circuits, logic, and software functions
to ensure the highest possible functional safety performance level is achieved.
* Insulated Metal Substrate power base provides superior heat transfer for increased reliability.
* Fail-Safe power component design.
* Reverse polarity protection on battery connections.
* Short circuit protection on all output drivers.
* Thermal cutback, warning, and automatic shutdown provide protection to motor and controller.
* Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments.
* Meets or complies with relevant US and International Regulations * EMC: Designed to the requirements of EN12895.
* Safety: Designed to the requirements of: * EN1175-1:1998+A1:2010
* EN (ISO) 13849-1
* IP65 Rated per IEC 60529.
* UL recognized per UL583.
Model 1238 AC controllers.
* CE marked as a programmable safety device under EN ISO 13849-1.
* Models available for 550 output at 48-84V system voltages. These are true 2
minute RMS ratings, not short duration ‘boost’ ratings.
* Enhanced 64MHz micro and additional FLASH memory doubles the available VCL code
space and provides more than twice the VCL execution speed.
* Six additional VCL-configurable CAN "mailboxes" significantly increases CAN
master capabilities.
* Advanced Pulse Width Modulation techniques produce low motor harmonics, low
torque ripple and minimized heating losses, resulting in high efficiency.
* Unmatched Flexibility * Easily programmable through the CURTIS Model 1313-4331 Handheld Programmer or 1314 PC Programming Station.
* Programmable for either traction or pump applications.
* Field upgradeable software.
* Integrated Battery state-of-charge algorithm and hour meter.
* Fully-featured generic software and VCL for typical Warehouse Truck applications is included.
* Comprehensive programming options and VCL allow other applications to be easily supported.
* CURTIS hand-held or PC Windows programming tools provide easy programming and powerful system
diagnostic tools.
* Integrated status LED provides instant diagnostic indication.
* Robust Safety and Reliability * Dual Microprocessor architecture cross-checks critical circuits, logic, and software functions
to ensure the highest possible functional safety performance level is achieved.
* Insulated Metal Substrate power base provides superior heat transfer for increased reliability.
* Fail-Safe power component design.
* Reverse polarity protection on battery connections.
* Short circuit protection on all output drivers.
* Thermal cutback, warning, and automatic shutdown provide protection to motor and controller.
* Rugged sealed housing and connectors meet IP65 environmental sealing standards for use in harsh environments.
* Meets or complies with relevant US and International Regulations * EMC: Designed to the requirements of EN12895.
* Safety: Designed to the requirements of: * EN1175-1:1998+A1:2010
* EN (ISO) 13849-1
* IP65 Rated per IEC 60529.
* UL recognized per UL583.
Certifications
Company Profiel
Hefei Huanxin Technology Development Co.,Ltd, established in 2004, is a professional manufacturer engaged in the research, development, production, sales and service of Motor Controller, DC-DC Converter, Drive Wheel Assembly, Instrument Cluster, Switch, Accelerator
and so on. Our company specialized in various kind of pallet trucks parts and forklift parts for both domestic and international markets.Also our company is the first-level agent of CURTIS BRAND and appointed of Britain Albright Contactor. In addition we have obtained ISO9001 and CE Certificates.Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your souring requirement.We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
and so on. Our company specialized in various kind of pallet trucks parts and forklift parts for both domestic and international markets.Also our company is the first-level agent of CURTIS BRAND and appointed of Britain Albright Contactor. In addition we have obtained ISO9001 and CE Certificates.Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your souring requirement.We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Exhibition
Shipping
Package:Normally we use the standard exporting packaging. We also can according to clients request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer’s destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
4:Delivery date: 5-8days
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer’s destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
4:Delivery date: 5-8days
FAQ
Q1.Can I have a sample order?
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%
A: yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%
Our Team