Product Description
CURTIS Battery Discharge Meter models 906D36BWBANV / 906D48BWBANV are used as the battery discharging level indicator for electric
vehicle lead–acid batteries.
Typical application: golf cart (Club Car, E-Z-GO, Star EV, Eagle, Yamaha, etc.), electric forklift, tow tractor, mobility vehicles
vehicle lead–acid batteries.
Typical application: golf cart (Club Car, E-Z-GO, Star EV, Eagle, Yamaha, etc.), electric forklift, tow tractor, mobility vehicles
Overview
CURTIS battery discharging meter models 906D36BWBANV / 906D48BWBANV are inexpensive, one piece, easy to install battery fuel
gauges. CURTIS 906 type meter is completely solid state and provides a reliable, accurate, and easy to read display of battery
state-of-charge. Model 906D36BWBANV / 906D48BWBANV are equipped with a DIN case (rectangular case) and a printed circuit board
mounted module for custom dash panel applications.
* The Output Signal option causes the voltage on pin 3 to drop from 5 to 0 volts at 80% discharge. It can be used to signal
another component or to allow for the disabling of a specified vehicle function, insuring against abusive deep discharge
conditions. The Output Signal can also be used to drive the CURTIS 1178 Relay Module.
* Special models and custom panels are available. For more details, please see the 906 Meter Datasheet (PDF format).
CURTIS battery discharging meter models 906D36BWBANV / 906D48BWBANV are inexpensive, one piece, easy to install battery fuel
gauges. CURTIS 906 type meter is completely solid state and provides a reliable, accurate, and easy to read display of battery
state-of-charge. Model 906D36BWBANV / 906D48BWBANV are equipped with a DIN case (rectangular case) and a printed circuit board
mounted module for custom dash panel applications.
* The Output Signal option causes the voltage on pin 3 to drop from 5 to 0 volts at 80% discharge. It can be used to signal
another component or to allow for the disabling of a specified vehicle function, insuring against abusive deep discharge
conditions. The Output Signal can also be used to drive the CURTIS 1178 Relay Module.
* Special models and custom panels are available. For more details, please see the 906 Meter Datasheet (PDF format).
Specifications
* Manufacturer: CURTIS
* Model: 906D36BWBANV / 906D48BWBANV
* Voltage Options (Volts): 36V / 48V
* Operating voltage: +/–25% of nominal voltage
* Display: 10-digit, LED
* Operating temperature: –40°C to +85°C
* Storage temperature: –50°C to +90°C
* Shock & Vibration: Meets SAE J 1378
Features include:
* All principal circuits are integrated in a single chip for long-life reliability.
* A 10-bar LED displays the state-of-charge successively, bar by bar, from full to empty.
* At 70% depth of discharge, a flashing LED signals an “energy reserve” alert.
* At 80%, alternately flashing LEDs provides an “empty” status warning.
* Model 906D36BWBANV / 906D48BWBANV is compact and easily installed in panel cutouts as small as 45.3 mm x 22.3 mm ±0.1, with as
little as 35 mm behind panel clearance needed.
* Recognizes improperly charged battery.
* Keyswitch activated LED display (state-of-charge is monitored as long as 906 is connected to battery).
* Memory allows gauge to recall state-of-charge whenever battery is disconnected.
* Three possible reset methods: * Open Circuit Reset (OCR): Upon reconnection of a battery the gauge will reset if it measures
2.09 volts/ cell or higher (example “B” profile) (for units with memory option).
* High Voltage Reset (HVR): Gauge must measure >2.35 volts per cell for 6 continuous minutes
during charging (example “B” profile).
* Charge Tracking Reset (CTR): Display tracks charge level during opportunity charging (requires
gauge to be connected to battery when charging).
* Manufacturer: CURTIS
* Model: 906D36BWBANV / 906D48BWBANV
* Voltage Options (Volts): 36V / 48V
* Operating voltage: +/–25% of nominal voltage
* Display: 10-digit, LED
* Operating temperature: –40°C to +85°C
* Storage temperature: –50°C to +90°C
* Shock & Vibration: Meets SAE J 1378
Features include:
* All principal circuits are integrated in a single chip for long-life reliability.
* A 10-bar LED displays the state-of-charge successively, bar by bar, from full to empty.
* At 70% depth of discharge, a flashing LED signals an “energy reserve” alert.
* At 80%, alternately flashing LEDs provides an “empty” status warning.
* Model 906D36BWBANV / 906D48BWBANV is compact and easily installed in panel cutouts as small as 45.3 mm x 22.3 mm ±0.1, with as
little as 35 mm behind panel clearance needed.
* Recognizes improperly charged battery.
* Keyswitch activated LED display (state-of-charge is monitored as long as 906 is connected to battery).
* Memory allows gauge to recall state-of-charge whenever battery is disconnected.
* Three possible reset methods: * Open Circuit Reset (OCR): Upon reconnection of a battery the gauge will reset if it measures
2.09 volts/ cell or higher (example “B” profile) (for units with memory option).
* High Voltage Reset (HVR): Gauge must measure >2.35 volts per cell for 6 continuous minutes
during charging (example “B” profile).
* Charge Tracking Reset (CTR): Display tracks charge level during opportunity charging (requires
gauge to be connected to battery when charging).
Our Company
Related products
Our factory
Exhibition
Customer Photos
Packing & Delivery
Certifications