CURTIS Battery Discharge Meter models 906D36BWBANV / 906D48BWBANV are used as the battery discharging level indicator for electric vehicle lead–acid batteries.

Typical application: golf cart (Club Car, E-Z-GO, Star EV, Eagle, Yamaha, etc.), electric forklift, tow tractor, mobility vehicles ...

CURTIS battery discharging meter models 906D36BWBANV / 906D48BWBANV are inexpensive, one piece, easy to install battery fuel gauges. CURTIS 906 type meter is completely solid state and provides a reliable, accurate, and easy to read display of battery state-of-charge. Model 906D36BWBANV / 906D48BWBANV are equipped with a DIN case (rectangular case) and a printed circuit board mounted module for custom dash panel applications.

The Output Signal option causes the voltage on pin 3 to drop from 5 to 0 volts at 80% discharge. It can be used to signal another component or to allow for the disabling of a specified vehicle function, insuring against abusive deep discharge conditions. The Output Signal can also be used to drive the CURTIS 1178 Relay Module.

Special models and custom panels are available. For more details, please see the 906 Meter Datasheet (PDF format).

Manufacturer: CURTIS

Model: 906D36BWBANV / 906D48BWBANV
Voltage Options (Volts): 36V / 48V
Operating voltage: +/–25% of nominal voltage
Display: 10-digit, LED
Operating temperature: –40°C to +85°C
Storage temperature: –50°C to +90°C
Shock & Vibration: Meets SAE J 1378

All principal circuits are integrated in a single chip for long-life reliability.
A 10-bar LED displays the state-of-charge successively, bar by bar, from full to empty.
At 70% depth of discharge, a flashing LED signals an "energy reserve" alert.
At 80%, alternately flashing LEDs provides an "empty" status warning.
Model 906D36BWBANV / 906D48BWBANV is compact and easily installed in panel cutouts as small as 45.3 mm x 22.3 mm ±0.1, with as little as 35 mm behind panel clearance needed.
Recognizes improperly charged battery.
Keyswitch activated LED display (state-of-charge is monitored as long as 906 is connected to battery).
Memory allows gauge to recall state-of-charge whenever battery is disconnected.
Three possible reset methods:
Open Circuit Reset (OCR): Upon reconnection of a battery the gauge will reset if it measures 2.09 volts/ cell or higher (example "B" profile) (for units with memory option).
High Voltage Reset (HVR): Gauge must measure >2.35 volts per cell for 6 continuous minutes during charging (example "B" profile).
Charge Tracking Reset (CTR): Display tracks charge level during opportunity charging (requires gauge to be connected to battery when charging).

Hefei Huanxin Technology Develop Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of First-class quality, Reasonable price, Best service and Professional product support. 

Package:Normally we use the standard exporting packaging. We also can according to clients' request .

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?
A: yes, we welcome sample order to test and check quality.

Q2. What about the lead time?
A: Sample needs 3-5 days.

Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.

Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%