main function

a) signal lamp
Ⅰ. Left-turn signal lamp(Green)
Ⅱ. Right-turn signal lamp(Green)
Ⅲ. Forward signal lamp (Green)
Ⅳ. Reversing signal lamp(Green)
Ⅴ. Brake signal lamp (Red)
Ⅵ. Power alarm indicator lamp (Red)

main function

b) Amp meter
AMP meter is displayed by LCD to show real-time load current.
Indication range: 0~300 A
Fluctuation range of Current<4A, error<±2A
Positive signal of current diverter is connected to positive pole of dashboard, meanwhile, linking both of their negative pole together.

main function

Not only do coulomb meter accurately displays the capacity of battery charge with the way of real-time detection, it also can be shown by LED on a scale of 1 to 10 in red as well.
It typically adopts booting test mode, showing the 10th unit bar from the left if battery power is full, otherwise it will displays the scales of last power-off state, and then it will successively indicate the 9th and 8th etc. from the left along with the battery power going down. During power indicator in critical alarm,it will fluctuate between 1st and 2nd unit bar, accompanied by the indicator shining back and forth. The indicator of panel alarm is able to flicker, while there is only one unit bar shining from the left.
d) Hour meter
Hour meter commence timing after power on, recorded as 0.1H for every 6 minute, along with function of accumulative memory. It is real-time display without shutdown and the maximum error is usually within 5 seconds. Besides, the maximum error of shutdown memory is actually controlled by within 1 minute.