Lab1st RFE-100L single effect rising climbing film evaporator
Negotiable
Min.Order:1
Labfirst Scientific Instruments (Shanghai) Co., Ltd.
Rising Film Eveporator
Rising film evaporator is a type of evaporator that is essentially a vertical shell and tube heat exchanger. The liquid being evaporated is fed from the bottom into long tubes and heated with steam condensing on the outside of the tube from the shell side. This is to produce steam and vapour within the tube bringing the liquid inside to a boil. The vapour produced then presses the liquid against the walls of the tubes and causes the ascending force of this liquid. As more vapour is formed, the centre of the tube will have a higher velocity which forces the remaining liquid against the tube wall forming a thin film which moves upwards.
Model | RFE-200L | RFE-500L | RFE-1000L |
Vacuum Degree (Mpa) | -0.06~-0.095 | -0.06~-0.095 | -0.06~-0.095 |
Evaporation Temp. (℃) | 45~75 | 55~75 | 55~75 |
Evaporation Capacity (kg/h) | 200 | 500 | 1000 |
Heating Area (m^2) | 4 | 10 | 16 |
Steam Pressure (Mpa) | 0.25 | 0.25 | 0.25 |
Steam Consuption (kg/h) | 220 | 600 | 1100 |
Primary Condensing Area (m^2) | 10 | 26 | 57 |
Secondary Condensing Area (m^2) | 0.5 | 1 | 2 |
Cooling Water Inlet Temp. (℃) | 32 | 32 | 32 |
Cooling Water Outlet Temp. (℃) | 40 | 40 | 40 |
Cooling Water Capacity (m³/h) | 15 | 32 | 65 |
Liquid Collector | 210L | 360L + 100L | 600L + 250L |
Evaporation Chamber (L) | 650 | 1100 | 2100 |
Gas-Liquid Seperator (L) | 30 | 70 | 140 |
Material | SS304 | SS304 | SS304 |