Fully automatic pill capsule filler filling machines With pharmaceutical properties

 

 

The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese madicine and the requirement of GMP, it has the characteristics of compact mechanism, small valume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. It increase the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.

 

Main Features:

1. It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly, so that it can be sure a long usage-life and precision of machine.

2. The working station cam runs under the good lubricating condition, and maintains the inner lubrication of cam slot to a full extent, increasing the pressure pulverization oil pump, thus extends the operation life of the spare parts.

3. Single movement for both upper and lower segments with two-lip seal provide a much better sealing performance.

4. It is controlled by the computer, has a stepless timing with the frequency-conversion, the numeral showing makes an easy operation and clear appearance.

5. The multi-bore dosing brings a precision dosage (it is controlled around ±3.5%); The capsule qualified rate is higher than 99%. It can be filled with the Chinese traditional medicine and the Western medicine.

6. It has a protector equipment for the operator and the machine. It has an automatic pause equipment when it is lack for the material. It has a steady and safe working, it is the best choise for the hard capsule made  factories.

7. Additional function of blowing and suction of module. ensure clean dust in moud hole.

 

Main Technical Parameter

Model	NJP-2000	NJP-2500
Productivity	120000 Capsule/H	150000Capsule/H
Size of Capsule	Capsule size 00"-5" and safety capsule A-E
Total Power	6.45KW	6.45KW
Water supply	500L/h,0.2-0.10Mpa	500L/h,0.2-0.10Mpa
Dust collector	160 m^3/h	160 m^3/h
Overall dimensions	1000*1050*1950mm	1000*1050*1950mm
Weight	1500kg	1500kg

 

Pictures: