Non-PVC Soft Bag IV Infusion Automatic Production Line       

 

 

Characteristics:

1.This line is compact and occupies less.

2. It adopts PLC programmable control, which is powerful and complete in intelligence control.

3. Operation can be made by touch screen, it has multi-languages (Chinese, English or others). Man-machine conversation interface is available on the screen. Parameters can be set directly by touch screen, such as welding temperature, time ,pressure, printing parameters and parameters of filling, SIP, CIP. Users can install printer and output each parameter according their needs.

4. It has rapid signal response system. Electromagnetic valve control and detection signals are joint by valve island and connected to controller. This structure is the most efficient signal transmission and most simple field maintenance.

5. Main driving parts of entire production line adopt imported servo motor reducer. It has high precision, accurate positioning and heat sealing without contact and pollution. Each sealing is compact. This line adopts advanced filling method, which is accurate. Each filling quantity can be easily set and altered by man-machine interface.

6. Pneumatic system adopts unified centralized exhaust. It not only reduces pollution and noise, but also has reasonable layout, beautiful outlooks.

7. It has powerful intelligence control. When setting parameters ,(such as printing, bag-making, filling and welding) are beyond setting volume, the machine will alarm.7,

8. It has complete fault searching and feedback functions. Procedure will immediately search fault and show it on the touch screen during operation. Fault will be shown clearly on the screen, which help operators handle faults timely.

9. It has good memory. Welding system and filling system has the function of storing. Users can store past welding parameters and filling parameters according to different films and filling medium. By doing this ,it can directly call the stored parameters without adjusting them.

10.The unique SIP and CIP system saves cleaning time and ensure effective sterilization. Time, pressure and temperature of on-line cleaning and sterilization can be directly adjusted by users on the touch screen. It is easy and simple to operate and can output each parameters according to needs.

11. Parameter setting has function of self-protection. Each parameter can be seen, altered and monitored on the touch screen by simple operation and users can preset maximum and minimum of each parameter to avoid man-made error, such temperature.

12. This production line can produce different specifications for IV solution products, including 100ml,250ml,500ml,1000ml. It’s easy and fast to alter specification sample. If alteration is needed in the production, just change the model and printing material to meet the requirements of massive production.

13.It has high configuration, thus it reduces troubles. In order to reduce hazard rate during operation, servo system, electrical accessories, PLC, pneumatic components and power components all adopt well-known international brand.

14. It has good adaptability to consumptive materials, such as non-PVC film, printing foil, tubes and sealing .

15. This entire production line adopts stainless steel material. The contacting part with liquid are ultra-low carbon austenitic stainless steel, the rest are mainly low carbon austenitic stainless steel, which comply with GMP standard.

 

Technical Parameter:

 

Description	Non-PVC Soft Bag IV Infusion Automatic Production Line
Model	SINO120-150000
Production Capacity	1200-15000BPH
Specification	100ml, 250ml, 500ml, 1000ml(Others to be tailored)
Measurement Tolerance	100ml≤±1.5%; 250ml≤±1%; 500ml≤±0.7%;(with style of mass flow)
Bag Film	Non-PVC double-layer film
Film Thickness	190±20um(tolerance: max.10%)
ID of Film Roll	Min.150mm
Max. OD of Film Roll	Max.600mm
Bag Form	Single port/ Double ports, hot-sealing
Printing	Hot foil printing
CIP/SIP	125°C-30mins
Solution Temperature	Max. 50 °C
Solution Pressure	2-4kg/cm²
Compressed Air Pressure	6Bar(dry/oil less)
Clean Air Pressure	4Bar(dry/oil less)
Cooling Water	15-20°C
Noise	max.75dB
Relative Humidity	max.50%
Average Humidity	85%
Ambient Temperature	max.24°C
Material	Contact with solution to be ultra-low carbon austenitic S/S, the rest mainly low carbon austenitic S/S

 

 

Sample: