10600nm co2 fractional laser for skin rejuvenation scars removal acne treatmenter
Product Description
Skin laser therapy instrument host, laser/laser joint arm/laser power supply/cooling system/display control system several modules
55 laser cavity when the laser can generate high voltage pulse xenon lamp and YAG crystal rod. When the laser xenon lamp injects a certain amount of energy into the xenon lamp, the YAG crystal rod is excited to emit 755/1064/532 nm laser light, and Polaroid unifies the emitted laser light to the same direction, so that the single output laser is better. After the laser enters the laser cavity, in front of the mirror, the laser resonance part of the mirror surface triggers the Q crystal for a short time, and then exits the laser lamp arm after two 45-degree mirror reflections. A lot of heat will be generated during the irradiation of the laser xenon lamp; it will heat up through the water circulation system.
Therapeutic principle
PicoSecond Laser uses ultra-short pulses (one trillionth of a second in length) to strike melanin with enormous pressure, which shatters into tiny dust-like particles. Since the particles are so small, they are more easily absorbed and eliminated by the body. This could mean better melanin removal and less overall treatment. PicoSecond Laser is a quick and easy non-surgical, non-invasive laser skin treatment for the chest or shoulders, face, hands, legs and other body areas. Picosecond laser VS Q-switching Under the pulse width of picosecond laser, the generated opto-mechanical stress acts on the target pigment particles, causing their volume to expand instantaneously, causing the target to be broken into particles, which are more easily cleared by phagocytes. The Q-switched laser has a pulse width of more than 5 ns, and the opto-mechanical stress efficiency is not as good as that of a picosecond laser. Large particles are generated, the pulse width is long, and the scattered energy spreads to the surrounding tissue, which has the risk of thermal damage. Therefore, picosecond lasers offer more effective and safer treatments than Q-switched lasers.
1,size (excluding joint arm, length x width x high, mm):65×46×55cm;
2,machine Net weight:36kg; joint arm:4kg;total weight:40kg
3,power:2000W;
4,over-current protector model:220V,10A
5,work: laser wavelength:1064nm;755mm;532nm
6,laser output frequency:1-10hz;
7,spot diameter:2-10mm adjust;
8,Maximum output energy of single pulse: 800mj
9,Eye hazard distance:NOHD 100m,In the seal of the operating room for the eyes are harmful, must wear protective glasses!
10,cooling water:Use deionized water or pure distilled water. 11,Cooling mode:Built in closed cycle water cooled type;
Common problem:
Q: I was afraid of pain, what treatment pain? Each treatment need how much time?
A: treatment process there will be CICI hot feeling, the pigment distribution in more places will be more obvious sense, according to the indications and therapeutic dose, the doctor will recommend the use of appropriate local anesthetic ointment and the air cooler to reduce discomfort, usually the treatment time is about 5-15 minutes, depending on the size of the treatment area and skin problems.
Q: my spot treatment too many times, if you go to the treatment of words will not leave a scar?
A:PicoSure of picosecond technology only need to use the general laser dose of 1/3~1/2 can achieve effective treatment, tissue to accept the lower dose stimulation, traumatic relative also reduced, not easy to produce the wound and cause the scar of the probability.
Q: picosecond laser tattoo removal effect is good?
A: the current effect is particularly significant is the use of picosecond laser tattoo, it does not produce heat damage to the surrounding tissue, so it will not leave a scar.
Q: heard that laser treatment can easily have anti black, with picosecond laser treatment will also have anti black problems?
A: picosecond laser energy focusing probe using "honeycomb lens",instantaneous effect can reduce the excessive stimulation, coupled with the instant high energy picosecond laser than traditional laser (switched Q) smashed the pigment particles shorter and more quickly, reduce the heat damage, protect the tissue of melanoma cells is not subject to excessive stimulation, can greatly reduce the normal cells were stimulated with long red problem B: after the treatment of pigmentation: slightly swollen red, please help the ice for 15-30 minutes, after the treatment of applying antibiotic ointment. The result in the treatment of callus after 10-30 minutes. C: after the treatment of tattoos: ice, wipe ointment and artificial skin to help protect the treatment site
Shipping
Packaging & Shipping
Packaging and Shinpping
Payment Terms
Payment Terms
Our Services
Our Service
Training: User manual and operation video are provided. Support online face to face training.
Warranty: Three years warranty on host machine is given. Six months free replacement warranty for handles, treatment heads, and parts.
After-Sale: We have a professional technology supporting team for your timely services. You can get the help you need in time by telephone, webcam, online chat (Google talk, Facebook, Skype). Please contact us once the machine has any problem. Best service will be offered.
OEM/ODM: We can offer you better OEM and ODM services. We have our own R&D department with many experienced designers and engineers and many production lines , so we have the great capacity to offer you high quality beauty machines according to your needs, ideas and samples.
Package: There’re different packages of our beauty equipments:carton box,aluminium alloy and wooden box.
No matter which package,there’s cood foam inside of the box to protect the machine during the shipment.So there’s no worry of any damages of the machine.
Shipment: Deliver the machine within 3-7 working days by air door to door service.