Fiber Optic Drop Cable Clamp

Fiber Optic Drop Wire Clamp, also called flat cable clamps, is designed to connect a triplex overhead entrance cable to a device or building. The drop wire clamps are widely used both indoor installation and outdoor installation, withstanding the rigors of all environmental conditions in the telecommunication outside plant. The placement of slots and a hole in the clamp’s inner wedges allow for cable slack adjustment, proper tensioning and assistance with re-entry.

Drop tension clamp is equipped with perforated shim, which increase the tension load on drop wire. The stainless steel wire bail allows installations of ODWAC drop wire clamps on the buildings, poles, strand with drive hooks, pole brackets, SS hooks and other drop wire fittings and hardware. That can be supplied either separately or together as assembly with FTTH-CLAMP.

Drop wire anchoring clamps and drop wire mounting fittings are available in Hardwarefactory. Optical fiber drop wire clamps are easily to be pick up according to mechanical resistance and diameter of cables‘ wire of messenger.

All the assemblies passed the tensile tests, operation experience with temperatures ranging from – 60 °C up to +60 °C test, temperature cycling test, aging test, corrosion resistance test etc.

• Used with telephone drop wire cable, and optical fiber cable in FTTH, FTTX, FTTB solutions.

• Handily adjust metal S-hook allows simple installation, require no additional tools.

• All the assemblies passed the tensile tests.

• The material for plastic parts is Nylon & PC and the hook material is stainless steel & galvanized steel.

• No special tools required for installation.

• Fiber optic drop wire clamp shall hold, without slippage, a suitable length of drop wire until sufficient load is applied to.

• For dead-ending self-supporting drop wire

• Features aluminum body and stainless steel bial wire.

• Saves conductor – drop wire may be cut to exact length

• Can be attached to bare neutral at any point in the span

• Adjustments in drop wire sag are easily made

• Grips ACSR, AAAC, or aluminum conductors

• Good corrosion resistance.