Factory Low Price Movable Cotton Candy Floss Machine With Cart
Negotiable
Min.Order:1
General feature
Model | Product Name | Specification |
B1 | Factory Low Price Movable Cotton Candy Floss Machine With Cart |
Unite Size(MM):520*520*550 Cage Size(MM):530*530*560 N/W(KGS):10 G/W(KGS):12 Power(W):1030 Voltage: 110V-60Hz / 220V 50-60Hz Output:30 Sec/one |
product show
Operating Instructions
1. Plug the machine into a 200-240V outlet, turn on the power switch to let the machine run for 1-2 minutes, pls check whether the machine runs normally or not.(It need to adjust if the machine shakes strongly, the user must make sure the machine put steady and the machine running well).
2. Turn on the controllor, adjust it to 150V-160V(see the voltmeter on the left), then let the machine warm-up about 4-5 minutes.(the power higher, the heating speed quicker).After warm up the machine, keep the machine on about 150-160V, then can make the candy floss for the whole day. During the machine working, if you don't want to close the machine, you can adjust the controllor into a lower voltage, such as 100V (to keep the head warm, so that next time when you need to make candy floss, you no need to wait so long time to heat the machine.)
3. Put one spoon clean granulated sugar into the central of the running head.
4. The candy floss will get out after 30 seconds, then use a bamboo stick to get the candy floss, revolve follow the inside of the pan.(the bamboo stick need clean with wet cloth)
5. After finishing the candy floss. Pls don’t stop the machine at once. Close the controllor, and then clean the turning dish with water at once (keep the head running then put little water into the inlet). Turn off the switch then clean the head with soft cloth.
Delivery time: Within 5-7 days after receiving clients' payment
Payment Terms:T/T L/C Western Union D/P D/A Escow Paypal
Packing: wooden box free of fumigation for small candy making machine cotton candy machine
Quality Guarantee: Our Quality guarantee term is for one year, Malfunctions which are caused by
operation mistakenly will be responsible for customers
1 Are you manufacturer
Yes we are the manufacturer and welcome to visit our factory
2 Can you change the machine voltage as our request
Yes we can change the machine voltage as customers’ request
3 How about your after-sale service
Our engineer can go outside to install and train your workers to operate the full machine line
4 Warranty time of your machine
2 years warranty time except for consumable spare parts
5 How about delivery time of your machine
Generally it needs 5-7 days, for big machines or producing line, it will be much longer but within our negotiated delivery time.