Visual Insemination Kit Insemination Gun with Adjustable Screen Basic Version for Cows Cattle

 Difference between the Upgraded Version and the Basic Version:
- The upgraded version can be customized with vibration massage function which can help relieve cow uterus. Constant temperature heating (close to the body temperature of cow) makes operation easier. If this function is needed, please contact us.
- The basic version is designed without the function.

Description:
Cattle Visual Insemination Gun, it has a high conception rate and simple operation. It allows users to observe the entire insemination process (Trans Cervical). It also protects the animal from harming and causing no uterine inflammation. It will not make the cattle feel uncomfortable during the insemination process. Our Cattle Gun ensure that it can pass through the uterine orifice of the animal and penetrate into the uterine for insemination to ensure successful pregnancy. Ordinary insemination gun cannot pass through the uterine orifice of the cow, so artificial insemination is prone to failure.

Main Technical Parameters:
- Item Name: Cow Visual Insemination Gun
- Model No.: BTS-NKESJ
- Total Length: 45cm
- Handle Width: 8cm
- Endoscopic Probe Rod: 35cm
- Probe Rod Diameter: 22mm
- Gas Channel: 2mm
- Photographing Channel: 3.9mm (Cold Light Source)
- Camera Lens: 180° Wide Angle
- Working Channel: 11mm
- Pixel: 5MP
- Screen Size: 3.5"
- Resolution: 640x480
- Rotation Angel: 120° & 360°
- Diameter of Expansion Head: 23mm
- Length of Expansion Head: 15mm
- Vas Deferens: 65cm

Performance Parameters:
- Storage Space: Support storage card 256G max.
- Functions: Take pictures, record videos and output to print
- Output Port: USB
- Charging: USB Charging
- Continuous Operating Hours: 2H

Parameters of Charging Adapter:
- Model No.: P5-1000
- Input: 100-240V AC, 50/60Hz, 0.15A
- Output: 5V DC 2000mA

Package Included:
- 1 x Insemination Gun
- 1 x Carry Case
- 1 x Power Adapter
- 1 x User Manual

Note: Other items in the pictures are not included, for demonstration purpose only. Thank you!

Using Steps:
1. Items needed for insemination:
Visual insemination gun (ensure enough electricity), expansion head, traditional insemination gun, tube for insemination needle, insemination needle (thawed), damp cloth, alcohol, several alcohol cotton and warm water.  

2. Insemination Operation:
- Clean the visual insemination gun with alcohol and alcohol cotton, to ensure that it is entirely sterilized and the camera is clear.
- Wash and disinfect the vulva of the mother cow with warm water. Wipe clean with a damp cloth after cleaning to ensure no residue remains.
- Put the thawed insemination needle into the outer tube to get ready for use.
- Turn the gun on and ensure that its image is clear. Insert the insemination gun into the vulva of the mother cow with upwards angle and 5-10cm into the body. And then insert horizontally about 25cm into the body until you see uterine.
- Keep the visual insemination gun stayed still, and insert the insemination needle with outer tube into the gun via the insemination needle channel. Make sure that the head of the needle reaches to the uterine by checking screen image.
- Rotate to insert the insemination needle into the cow's uterus by 10cm. It has reached to the bottom of the uterus. And then push the semen in the insemination needle to the uterus. (Attention: If it reaches too deeply into the uterus, the semen might stay in the corner of the uterus, reducing conception rate.)
- After finishing insemination process, withdraw the insemination gun slowly. After the insemination gun is removed from the mother's vagina, wipe it off with a clean, damp cloth and disinfect with alcohol cotton. Finally, the gun is packaged and stored in a designated container.

 

 

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

 

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

 

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

 

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

 

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

 

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

 

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)