Thicker 50KHz-2GHz Malachite SDR DSP Malahit SDR Receiver with Official Authorized Registration Code
Negotiable
Min.Order:1
5M-6GHz Low Noise RF Amplifier Wideband Gain 20dB Medium Power Amplifier Board
10MHz Constant Temperature Crystal Oscillator Sine Wave Output Frequency OCXO Board
70MHz-6GHz USB 3.0 SDR Board RF Development Board Compatible with USRP-B210 MICRO+ without OCXO
100MHz Low Phase Noise 10M Input 100M Output Double Frequency Phase Locked Crystal Oscillator
6 Microphone Array Voice Module ROS Voice Support Sound Source Location Support Voice Navigation
Musical Paradise MP-301 MK3 Mini Tube Amplifier with Headphone Output (Deluxe) 6L6+6J8P
Advantages:
1. 3.5-inch capacitive screen
2. 4-layer board structure, higher performance than two-layer PCB
3. Adopt a sound unit, 2 vibrating chambers, the speaker comes with a sound chamber, the bass sound quality is very full
4. Russian official certification registration code, support official upgrade to the latest firmware 1.10b and later versions
5. Built-in 3000mah lithium battery
Features:
- DSP SDR Receiver for Malahit
- Capacitive touch screen
- Flash via USB cable
- Supported frequency range: 50KHz-2GHz (200MHz-400MHz is blocked by the author)
- Demodulation mode: AM, SSB, NFM, WFM
- Russian official certification registration code, support official upgrade to the latest firmware 1.10b and later versions
Product Parameters:
1) The radio is built on the principle of SDR-the function is determined by loaded software;
2) Frequency range: 50KHz-2GHz (200MHz-400MHz is blocked by the author);
3) All types of analog modulation: AM, SSB, NFM, WFM;
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, for Noise Blanker, AGC, equalizer;
5) Use cheap but fully functional chip msi001;
6) The powerful stm32h743 with a clock frequency of 480 MHz is applied;
7) 3.5-inch IPS display touch screen;
8) There is a built-in UHF;
9) Controls: 2pcs; encoders with buttons and touch screen;
10) It is powered by an external TYPE-C (for Huawei mobile phone) interface or battery (built-in 3000mah lithium battery), which can be charged by TYPE-C.
11) Consumption: 300mA when listening to headphones;
12) The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
13) Connect to computer via USB, which can transfer CAT, IQ and audio.
14) 160 kHz span, with scalability;
15) Sensitivity: Under the condition of up to 250MHz, s/w is 0.3μV = 10dB; due to lack of measurement equipment, so the above measurements were not taken;
16) Due to the characteristics of msi001 chip used, dynamic blocking range is about 85dB.
17) With backlight control;
18) SMA female antenna socket;
19) Motherboard size: 100 x 70mm (without the sizes of connectors).
Package Included:
- 1 x Set of SDR Receiver
Note:
- The motherboard can be powered by TYPE-C charger for Huawei mobile phone. It can be equipped with a long wire as an antenna for easy listening.
- Other items are not included, for demonstration purposes only.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)