JUNTEK PSG9080 Programmable Arbitrary Generator 1nHz-80MHz Function Generator Pulse Generator

-Arbitrary waveform generator
-Pulse generator
-Noise generator
-Frequency meter
-Counter
-Frequency scanner

Technical Parameters
-Model:PSG9080
-Channel:2  
-Maximum frequency of sine wave:80MHz
-Sampling Rate:300MSa/S

Waveform Characteristics
-Wave length:8192 points/channel
-Waveform vertical resolution:14 bits
-Waveform type: Sine wave, square wave, pulse wave (duty cycle,pulse width&cycle time can be accurately set),triangle wave,rising saw-tooth wave,falling saw-tooth wave,CMOS wave,DC level,half wave,full wave,positive step wave,inverse step wave, exponential rise,exponential fall,Lorentz pulse wave,muti-sound wave,random noise wave,trapezoidal pulse wave,sink pulse wave,amplitude modulation waveform,frequency modulation waveform and 99 groups of user-defined wave-forms.

Frequency Characteristics: 
-Sine wave frequency range:1nHz-80MHz
-Square wave frequency range:1nHz-30MHz
-Triangle wave frequency range:1nHz-50MHz
-Pulse wave frequency range:1nHz-30MHz
-TTL digital wave frequency range:1nHz-20MHz
-Arbitrary wave frequency range:1nHz-50MHz
-Pulse width adjustment range:5nS~4S
-Pulse period adjustment range:10nS~40S
-Frequency minimum resolution:1nHz
-Frequency accuracy:±5ppm 0-50℃
-Frequency stability:±3ppm/year

Sine Wave Spectral Purity
-Total harmonic distortion:≤0.5% (at 1kHz,5Vpp)

Signal Characteristics
Square Wave
-Rising/falling edge time:≤10nS
-Overshoot:≤10%
-Asymmetry:≤0.1%

Ramp&Triangle Wave
-Linearity:≤1%(less than 1MHz)
-Asymmetry:≤1%(less than 1MHz)

Pulse Wave
-Pulse Width:5nS~4S
-Pulse period:10nS~40S
-Duty cycle:0.01%-99.99%
-Rising/falling edge:≤10nS
-Overshoot:≤10%

Arbitrary Wave
-Wave length:8192 points(8K points)
-Vertical resolution:14 bits
-Minimum rise/fall time:≤10nS
-Overshoot:≤10%
-Arbitrary waveform non-volatile storage number:99

Output Characteristics: 
Amplitude
-Amplitude range

Frequency≤1MHz,2mVpp~25Vpp;
1MHz≤Frequency<11MHz, 2mVpp~10Vpp;
11MHz≤Frequency<60MHz, 2mVpp~5Vpp;
60MHz≤Frequency<80MHz, 2mVpp~3.6Vpp.
-Amplitude resolution:1mVpp
-Amplitude stability:± 1% ±1 mVpp(at 1kHz,>10mVpp)
-Amplitude flatness:

±1%(0.1dB)<10MHz;
±2%(0.2dB)<10MHz~50MHz;
±10%(0.9dB)<50MHz~70MHz;
±20%(1.9dB)<70MHz~80MHz.

DC Bias
-Offset adjustment range:-9.99V-15.00V
-Offset resolution:0.01V

Phase Characteristics:
-Phase adjustment range:0-359.9°
-Phase resolution:0.1°

Waveform Output
-Output impedance:50Ω(typical)
-Protection:Short circuit protection

Modulation Characteristics:  
- Modulation type:AM,FM,PM,ASK,FSK,PSK,PWM

AM:
-Carrier wave:Sine wave,square wave,saw-tooth wave,arbitrary wave(except DC)
-Modulation source:Internal/external
-Modulated wave:Sine wave,square wave,saw-tooth wave,noise wave,arbitrary wave
-Modulation depth:0-200%
-Modulation frequency:1mHz-1MHz

FM:
-Carrier wave:Sine wave,square wave,saw-tooth wave,arbitrary wave(except DC)
-Modulation source:Internal/External
-Modulated wave:Sine wave,square wave,saw-tooth wave,noise wave,arbitrary wave
-Modulation frequency:1mHz-1MHz
-Frequency deviation:0.1Hz to carrier frequency

PM:
-Carrier wave:Sine wave, square wave,saw-tooth wave,arbitrary wave(except DC)
-Modulation source:Internal/External
-Modulated wave: Sine wave, square wave, saw-tooth wave, noise wave, arbitrary wave
-Phase deviation:0°-360°
-Modulation frequency:1mHz-1MHz

ASK:
-Carrier wave:Sine wave,square wave,saw-tooth wave,arbitrary wave(except DC)
-Modulation source:Internal/External
-Polarity:Positive and negative
-Rate:1mHz-1MHz
-ASK amplitude: 0%-200%

FSK:
-Carrier wave:Sine wave,square wave,saw tooth wave, rbitrary wave(except DC)
-Modulation source:Internal/External
-Modulated wave:50% duty cycle pulse wave
-Polarity:Positive and negative
-Rate:1mHz-1MHz
-Frequency hopping:0.1Hz-80MHz

PSK:
-Carrier wave:Sine wave,square wave,saw tooth wave,arbitrary wave(except DC)
-Modulation source:Internal/External
-Polarity:Positive and negative
-Rate:1mHz-1MHz
-PSK phase:0-360°

PWM:
-Carrier wave:Pulse wave
-Wave inversion:Regular and reverse
-Pulse period:0.01uS-40S
-Pulse Width:0.001uS-4S

Burst:
-Idle:Zero position,positive maximum,negative maximum
-Mode:Single,automatic
-Trigger source:Manual burst,CH2 burst,external burst(AC),external burst(DC)
-Pulse number:1-1000000000

Measurement&Counting Function:  
Measurement Mode:
-Measurement function:Frequency,positive and negative pulse width,period,duty cycle
-Coupling method:DC,AC
-Gate time:0.001S-10.000S
-Measurement mode:Low frequency,high frequency
-Frequency measurement range:1Hz~100MHz
-Input signal amplitude range:2Vpp~20Vpp
-Period measurement:10nS~4S
-Pulse Width:4S
-Duty cycle measurement range:0.01%~99.99%

Counter mode
-Counter range:0-4294967295
-Coupling method:DC&AC coupling
-Counting method:Manual

External Modulation Input Characteristics:
-Input signal amplitude range:0~3Vpp
-Input signal frequency range:DC~200kHz

Scanning Characteristics:
-Sweep channel:CH1/CH2
-Carrier wave:Sine wave,square wave,saw-tooth wave,arbitrary wave(except DC)
-Sweep function:Sweep frequency,sweep amplitude, sweep duty
-Sweep mode:Linear,logarithmic
-Sweep direction:Increment,decrement,round trip
-Start/end frequency:Consistent with the upper and lower limits of the corresponding carrier frequency
-Start/end amplitude:Consistent with the upper and lower limits of the corresponding carrier amplitude
-Start/end duty cycle:Consistent with the upper and lower limits of the corresponding carrier duty cycle
-Sweep time:0.01S-640S

Voltage Control Characteristics:
-Voltage control channel:CH1/CH2
-Carrier wave: sine wave,square wave,saw-tooth wave,arbitrary wave(except DC)
-Voltage-control function:Frequency control,amplitude control,and duty cycle control
-Sweep mode:Linear,logarithmic
-Start/end frequency:Consistent with the upper and lower limits of the corresponding carrier frequency
-Start/end amplitude:Consistent with the upper and lower limits of the corresponding carrier amplitude
-Start/end duty cycle:Consistent with the upper and lower limits of the corresponding carrier duty cycle
-Voltage-control voltage range:0-5V,starting point and end point can be set arbitrarily
-Running mode:Debugging,normal
-Storage:P00-P19(20pcs)
-Programming number:00-99
-Programming time:Single serial number programming time 0-99S

General Specifications:  
-Screen:3.5" TFT color LCD display
-Resolution:320*480
-Color:64K true color
-Quantity:100 groups
-Location:00 to 99 (The data of 00 storage location is loaded by default)
-Interface method:USB to serial interface
-Extension interface:Serial port with TTL level mode,convenient for secondary development
-Communication rate:Standard 115200bps
-Protocol: Using the command line,the protocol is open
-AC power:Supply voltage:85V-264V,47-63Hz
-Power consumption:Less than 30W
-Fuse:250VAC,T3. 15A
-DC power:Supply voltage/current:DC5V±0.5V 3A
-Temperature:0~40℃
-Humidity:Humidity<80%
-Size:247*243*402mm (LxWxH)
 

Detail photo