2.8" Touch Screen 50KHz-900MHz Vector Network Analyzer Kit MF HF VHF UHF Antenna Analyzer with Shell
Description:
We have redesigned its PCB board. Designed with simple but practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. Its improved frequency algorithm can support the measurement frequency of 900MHz with the odd harmonic extension of si5351. Designed with a metal shield to reduce external interference and improve measurement accuracy, si5351 directly outputs frequency of 50K-300MHz with dynamics better than 70dB. Its expanded 300M-600MHz band can provide dynamics better than 50dB, and 600M-900M band with dynamics better than 40dB.
It is a DIY vector network analyzer. It features a 2.8-inch touch screen, 400mAh electricity for off-line application in 2 hours. If you want to prolong the testing time, you can connect it to an extra power bank, or contact us for larger capacity. As for testing via TX/RX, you can get full set of parameters of S11 and S21. What you have to do is to replace the connection cables in the receiving and transmitting ports.
Basic Parameters:
- PCB: 54mm x 85.5mm x 11mm (without the size of connectors, switches)
- Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
- RF Output: -13dbm (maximum -9dbm)
- Frequency Accuracy: <0.5ppm
- Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
- Port SWR: < 1.1
- Display: 2.8 inch TFT (320 x240)
- USB Interface: USB Type-C; Communications Mode: CDC (Serial)
- Power Supply: USB 5V 120mA, built-in 400mAh electricity, maximum charging current 0.8A
- Number of Calibration Points: 101 (Fixed)
- Number of Scanning Points: 101 (Fixed)
- Display Tracking: 4, Marking: 4, Save Setting : 5
- Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart and the like
Package Included:
- 1 x NanoVNA Main Unit
- 1 x USB Type-C Data Cable
- 2 x 30cm SMA Male to Male RG174 RF Cables
- 1 x SMA Calibration Kit Male
- 1 x SMA Female to Female Connector
Downloard Operation Manual & Control Software for PC:
/5HFmWGl
Note: Please note that the analyzer comes without a shell.
1. Double-click "DfuSe_Demo_V3.0.4_Setup.exe" to install the Dfuse software.
2. Open the Dfuse software, turn off Nanovna, press and hold the button on the right side of Nanovna, plug in the USB cable, and turn on Nanovna.
(The screen displays white, the device list displays STM Device,) choose the location of nanovna firmware to upgrade , click upgrade button to start upgrading, wait for about 10 seconds until completed.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)