XC809DF 6 Axis CNC Motion Controller System w/ 7" Color LCD For Carving Milling Drilling Tapping

System Introduction:
It is a new generation multifunctional CNC system for engraving, milling, drilling and tapping. Support carving, milling, drilling and tapping. A 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small segment forward-looking algorithm are used. It features 0.001 mm interpolation accuracy, the highest speed of 30 m/min. It is the best choice for engraving machine, small processing center, CNC milling machine and CNC drilling machine.

Software & Hardware Characteristics:
- Based on 32-bit microprocessor, full linkage, 0.001 mm interpolation accuracy, maximum speed 30 m/min, support direction + pulse and orthogonal pulse.
- It adopts 7-inch color wide screen LCD with resolution of 800 x 480 and interface style for Windows. Equipped with 8 soft function keys, it is simple and easy to learn and operate. Provides rich display interfaces such as parameter classification, alarm log, system diagnosis, etc. to facilitate debugging and maintenance.
- International standard G instruction, compatible with system instruction for FANUC.
- 40 Kinds of G instructions support drilling and tapping cycles.
- Full-screen editing of parts program, built-in 512M mass program space, can store N parts program.
- Has USB interface, supports U disk file reading and writing, data backup.
- Input 24 (expandable to 96) points, output 24 (expandable to 96) points (customized), flexible and convenient.
- Chinese and English operation interface, complete help information, more convenient operation.
- The system adopts acceleration and deceleration control before interpolation.
- Support long and radius cutter patches.
- Supporting hand wheel trial processing, facilitating program debugging.
- Supports multi-level operation authority, facilitates equipment management, and has time-limited system locking function.
- Support for UG, Mastercam, PowerMill, Feature CAM, ArtCAM, JDPaint, Wentai and other third-party software G code files.
- Support self-programming tool library, flexible use of a variety of tool libraries.

Technical Specifications:
Basic Functions:
- Number of control axes: XC809DC, 3-axis; XC809DD 4-axis; XC809DE 5-axis; XC809DF 6-axis;
- Number of linkage axes: Full linkage
- Tool library: Support, need to edit tool library code
- Spindle: 2-way analog spindle, in which spindle 1 can use digital spindle (occupying a digital spindle)
- Spindle monitoring: With
- Minimum instruction unit: 0.001 mm
- Maximum instruction value: ±99999999 x minimum instruction unit
- Fast feed speed: 30,000 mm/min
- Fast feed rate: F0, 25%, 50%, 75%, 100%
- Pulse mode: 1: Direction + Pulse 2: Orthogonal Pulse (recommended, anti-jamming stronger if driver supports)
- Maximum frequency: 100Khz, 200Khz, 500KHz can be set. (500KHz can only be achieved in all orthogonal output modes of axes)
- Feed rate multiplier: 0-150%
- Electronic gear ratio: 1-65535:1-65535
- Automatic acceleration and deceleration: With
- Prospective algorithm for high-speed small segment: With
- Handwheel Trial Processing: With
- Location: G00 (Linear Interpolation Location)
- Interpolation: straight line (G01), arc (G02/G03/G12), helix interpolation
- Return Reference Point: Automatically Return Reference Point (G28)
- LCD: 7-inch TFT LCD screen with resolution of 800 x 480
- MDI Software Key: 8pcs
- Single step: x1, x10, X100
- Communication interface: U disk interface
- External handwheel interface: With
- I/O Interface: 24/24 (Extensible to 96/96)
- Pause (seconds): With
- Quasi-stop state: With
- Quasi stop: With
- Storage Travel Check: With
- MDI running: With, it supports multiple runs.
- Reset: With
- Jump switch: With
- Single-stage operation
- Program protection switch: With
- Self-diagnostic function: With
- Emergency stop: With
- Power supply: single phase AC220V+10%-15%, 50Hz+1Hz
- Coordinate System: Machine Tool Coordinate System (G53), Workpiece Coordinate System (G92, G54-G59), Local Coordinate System (G52), Plane Designation of Coordinate System
- Automatic coordinate system setting: With
- Decimal point input: With

Auxiliary Function:
- Auxiliary functions: M2 digits, M code customization, manual/MDI/automatic control of spindle forward, reverse and stop; control of coolant start and stop; control of lubrication start and stop, etc.

Spindle Function:
- Spindle function: Dual-spindle
- Digital spindle: Spindle 1 supported, occupy one-way digital axis (Z axis does not support), the speed is more stable
- Tapping: Support
- Spindle analog output: With, dual-spindle

Tool Function:
- Tool function: support automatic tool change, support split-centered tool, three-point centered tool alignment
- Tool Compensation Memories - 9999.999 to 9999.999, 99pcs
- Tool Compensation, Length Tool Compensation and Radius Tool Compensation

Editing Operation:
- Editorial Functions: Parameters, Diagnostic Bit Input, Program Editing, MDI Multi-segment Execution
- Storage capacity: 512M
- Number of stored programs: 500pcs
- Display of Program Names: Chinese, English, Numbers and Combinations
- Procedure line lookup: With
- Skip the optional procedure section: With
- Program switch: With

Display:
- Display: Chinese, English
- Display processing time, number of parts: Yes
- Spindle speed, M/S instruction: With

Host Size (mm):
- Dimensions: 390 x 253 x 80mm/15.4 x 10 x 3.1" (HxWxT)
- Opening Size: 370 x 228mm/14.6 x 9" (HxW)

Package Included:
- 1 x CNC Control System

Detail photo 

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Sample ususally take within 3 working days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.

Q4. How to proceed an order?

A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.

Q5. After paid, what info of the supplier provided?

A: Tracking number

Q6: Do you offer guarantee and after-service for the products?

A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.

Packing and Shipping

Package: Normally we use the standard paper package to export worldwide.

Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.

3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.

4. By Sea: Delivery from the Shenzhen sea port .

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery