MACH3 Speed Analog 48V 500W WS55-220 Brushless Spindle BLDC Motor Driver Controller 

 

Product Description:
- WS55-220 brushless DC motor controller is commonly used in 24V, 36V, 48V third voltage ranging from 20V to 50V that the motor can work normally. Compatible square wave includes Holzer and no Holzer. It has potentiometer speed control function, external 10V voltage speed regulation function, switch machine function, speed output function, alarm output function, positive and negative reverse function, etc.It has protective shell.
- Widely used in small equipment, power tools, pumps, fans control system, etc.

Have:
L compatible with Holzer and no Holzer
L start to stop
L external potentiometer control/external voltage control
L lnertia stop
L owe overvoltage protection
L current limiting
L over-current protection
L locked-rotor protection
L the alarm signal output
L speed signal output
L compatible with and without hall hall

Controller Performance Parameters:
- The rated voltage:20 to 50 VDC
- Rated current:WS55-220:12 a
- Current limiting:15 a
- Maximum speed:Support speed 20000RPM or more, the specific speed depends on the motor itself and load.
- Two modes of speed regulation:
1.external potentiometer: through this potentiometer speed regulation;
2.external voltage: external 10VDC voltage speed regulation;
Note: The two speed regulation can not be used simultaneously;
- Speed output:PG signal: There is a 5v-revolution pulse output between the port and the ground.
The output frequency is set to P (Hz), the motor class logarithm is N, and the speed is F (RPM), then the output speed frequency is P=F*N/60;
Alarm output:ALM signal:There is an 5v alarm pulse output between the port and the ground.
Positive inversion function:F/R:Fiddle the toggle switch on the corresponding side, the motor steering direction can be changed. For the toggle switch, the white part is up and down, then twang it up and down. For the toggle switch, the white part is horizontal, and the twang horizontally.
- Start-stop:Two control modes:
1.External switch EN: Transfer through switch;
2.Side toggle switch EN: for the toggle switch, the white part is up and down, then down for the start; for the toggle switch, the white part is horizontal, then dial to start
- Remark: You can only turn one control at the same time, one of the switches is closed, and the other one is valid
- Blocking protection:If the motor stops working ,switch on the power again to start.
- Power light:Green light: power on and off
- Status light:Red light: two flashes in standby time, after starting, extinguish. Blink when fault occurs
- Insulation resistance:>100M at ambient temperature and atmospheric pressure
- Insulation strength:At normal temperature and pressure, 0.5KV, 1 minutes

Usage environment and parameters:
- Storage temperature:-20℃~+65℃
- Usage environment:occasion:Avoid direct contact with dust, fumes and corrosive gases
- Temperature:0-45 DEG C
- Humidity:< 80%, no frost, frost free
- Shock:5.9m/S2 MAX
- Storage humidity:0~95%RH
- Volume:96mm (long) *67mm (wide, including terminal block) *37mm (high)
- Weight:195g (with potentiometer and switch)
- Terminal connection mode:Potentiometer speed control connection mode;External 10V speed control connection mode

Package List:
- 1 x 48V 500W WS55-220 Brushless Spindle BLDC Motor Driver Controller
- 1 x Connection wire

 

 

Detail photo

 

 

 

 

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

 

Q2. What about the lead time?

A: Sample ususally take within 3 working days.

 

Q3. Do you have any MOQ (minimum order quality)limit?

A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.

 

 

Q4. How to proceed an order?

A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.

 

Q5. After paid, what info of the supplier provided?

 

A: Tracking number

 

Q6: Do you offer guarantee and after-service for the products?

A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.

 

 

Packing and Shipping

Package: Normally we use the standard paper package to export worldwide.

 

Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

 

2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.

3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.

4. By Sea: Delivery from the Shenzhen sea port .

 

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery