cnc controller, buy NewKer with professional user manual NEW990MD four Axis CNC Lathe & Turning Controller on China Suppliers Mobile

Product Details

Poster

Product

Product detail:NewKer with professional user manual NEW990MD four Axis CNC Lathe & Turning Controller

Parameter details
System Function			G code shows
number of control axis	3~4 (X,Y,Z,A)	Locate rapidly:	G00
The smallest programming:	0.001mm	Straight line interpolation	G01
The most programming:	±99999.999mm	Arc interpolation:	G02/03
The highest speed:	30m/min	Thread cut:	G02/03
Feed speed:	0.001~15m/min	high speed deep drilling loop	G73
Continuous manual:	one axis or two axis at the same time	point drilling loop	G81, G82
Line interpolation:	Straight line, arc, screw thread interpolation	Line cutting drilling loop	G73
Cutter compensation:	Length of the compansation、nose of tool compensation	Boring loop	G85, G86, G89
Spindle function:	gear、Double analog control、Rigid tapping	Tapping loop	G74, G84
Handwheel function:	panel、handheld	program loop	G22, G800
handwheel processing:	The handwheel processing function	local coordinate system:	G52
Screen protection:	The screen protection function	check skip	G31, G311
Communication function:	RS232、USB interface	polar programming	G15/16
Compensation function:	cutter, clearance, screw, radius compensation	metric and inch programming	G20/21
Edit program:	relative/absolute programming, hybird programming	program mode	G90/91
Preread function:	Preread 10,000 short straight lines	processing plane	G17, G18, G19
limit position function	hard limit, soft limit	workpiece coordinate system:	G54~G59
Password protection:	Multilevel password protection	tool length compensation	G43, G44, G49
Input/output:	I/O 24*24	tool radius compensation	G45~G48
PLC programme:	All open PLC design	C tool radius compensation	G40, G41, G42
Acceleration and deceleration control:	Straight line、Index	Accurate positioning/continuous path processing	G60/G64
Number of encoder:	any setting	returns the starting point	G26, G261~G264
User macro program:	Have	returns the fixed point	G25, G61, G60
Electrical gear function:	Have	returns the reference point	G28, G281~G284
		delay function	G04
		auxiliary function:	S、M、T

Function advantages

Product features

Never Crush the machine, the system with memorial function (Abosolute feature)

Needn't install hard limit with this 3 axis control wood drilling and milling machine and back to the zero point (Abosolute
feature)

Adapt bus modbus technology, ARM + DSP + FPGA technology

USB and RS232 port, DNC function of USB (NEW)

Network remote technology and could diagnose the system online (NEW)

User's storage is 128M and could be infinite number of program (NEW)

Abosolute type of motor (17bits multi circle) controlling technology (NEW)

The most moving rapid speed is 300m/min, processing speed reaches 0.01 ~ 30m/min (NEW)

The cycle of interpolation is 2ms, controlling accuracy is 0.1um (NEW)

All closed-loop with grating ruler control and the accuracy is <2um (NEW)

Preread the short line program to satisfy with high speed engraving and cutting (NEW)

Intelligent Man-Machine dialog interface (NEW)

Product applications

About us

Delivery procedures

FAQ