Food & Beverage Machinery, buy Juice beverage line sugarcane juicer beer filling and capping automatic liquid bottle filling machine on China Suppliers Mobile

Product Details

Product Description

Juice beverage line sugarcane juicer beer filling and capping automatic liquid bottle filling machine

Introduction :

This series of beer filling production lines are dedicated to the isobaric filling of glass bottled beer and carbonated beverages. The filling adopts one-time or two-time vacuuming technology, with the function of automatically closing the valve of the bottle and flushing broken glass, and using hot water to stimulate foam before capping.

Performance characteristics:

1. This machine adopts fully automatic working mode, which automatically completes the station transfer of the bottle and the clarity and filling of each station without manual operation by personnel
2. Equipped with a separate cleaning function, only cleaning but not filling, can be used as a pre-washing machine
3. The mechanical transmission mechanism adopts the mechanical curved rod linkage mode to make the beer filling machine run smoothly, reliably, and accurately locate, and avoid the occurrence of failure rates.
4. The equipment is equipped with automatic flow detection, pressure detection, residual liquid detection after purging, wine spear opening detection and other detection functions, as well as station alarm.
5. The filling adopts CO2 backup pressure and pressure-maintained low-pressure differential fully enclosed filling method. The filling volume is detected by imported flowmeters, which can ensure low foam, low consumption and

accurate filling volume of the canned wine.
6. The water tank is automatically filled with water, automatically heated and kept constant temperature.
7. The equipment can set and adjust the filling capacity through the touch screen, and can adjust the error, and can display the number of bottles and liters filled in real time.

Rinsing section

This machine is a rotary bottle washer, mainly used for washing new bottles of beverages, water and other products. The bottle is then sent to the filling machine for product filling.

The PET bottle enters the equipment by the separating star wheel, the bottle mouth is clamped by the clamp and the turning

mechanism, and the bottle mouth is turned down. The sterile water is rinsed and drained, and it is automatically turned over to the bottle mouth facing up, and then transported to the filling through the star wheel. Installed. The main structure of the

equipment is in contact with the flushing medium and the external protective cover is made of high-quality stainless steel, open

gear transmission. Brand new stainless steel clamp, simple structure, convenient adjustment, less contact area with bottle mouth, effectively avoiding secondary pollution to bottle mouth.

Filling part

The filling part realizes the filling of

materials into the washed bottles sent by the bottle washer.

The filling valve adopts the pressure filling negative pressure type backflow method, the filling is quick and sensitive, and the

filling level is high in accuracy. There is no spring in the valve, and the material does not contact with the spring, which

facilitates the cleaning of the inside of the valve. In order to ensure the filling process and the filling temperature, the

material in the filling valve is in a micro-reflux state when there is no bottle or when it is shut down. The filling cylinder

adopts the full cylinder method to ensure the stability of the pressure in the cylinder.

The whole machine has a complete CIP cleaning interface.

The double guide rod bottle lifting structure is adopted to make the bottle lifting and centering stable.

The main drive adopts gear drive that is open type combined drive, which has high efficiency, low noise, long life, convenient

maintenance and sufficient lubrication. The frequency converter is used to control the speed of the main motor of the machine. The

machine adopts stepless frequency conversion speed regulation.

Capping part

The capping machine drives the turntable to

rotate through the reducer. The cover leaves the hopper from the cover outlet under the action of centrifugal force. There is a front and back cover separating device at the outlet. When the back cover passes by, the cover automatically falls into the return pipe, and the back cover is automatically blown into the hopper by wind.

Only the front cover can enter the chute smoothly. The cover volume in the hopper is automatically detected by the photoelectric switch to control the cover conveyor to ensure that the lower cover achieves the desired effect. When the front cover enters the slideway, you can enter the cover feeding tray smoothly. In order to prevent accidents, an anti-reverse cover dial is also configured on the slideway to ensure that the cover that enters the feeding cover tray is correct. A pair of slides are also provided Photoelectric switch, when detecting that there is no cover, it will stop the host immediately.

In order to effectively remove the broken cover without the anti-theft ring and clean the remaining cover of the hopper, there is

a movable outlet directly opposite the hopper outlet to meet this function.

Control System

1. PLC automatically
Completes the whole process control of the three-in-one filling machine from bottle in to bottle out.
2. Using touch screen
Operation, production speed, shift output count, fault category, fault occurrence point, etc. are all displayed on the screen.
It can also automatically count the time of occurrence of failures, failure categories and other information.
3. The main electrical components are all world famous brand products to ensure the excellent performance of the whole machine.

Product Paramenters

EQUIPMENT TYPE	Full automatic
APPLICATION FOR BOTTLE	Round or square bottle Volume 200 - 2000ml Diameter: Φ50~120mm Bottle height:160~320mm Diameter of bottle mouth: Φ25~38mm
CAPACITY PER HOUR	2000BPH~24000BPH

Detailed Images

Related Products

Packing&Shipping

1.We can load container at:qingdao,shanghai ,ningbo,tianjin,guangzhou etc.

2.Orange provide shipping method:Courier service,Air transport,Sea Transport

3.Can accept oder:Full container cargo load,Less container load

4.Our service:EXW,FOB,CIF,CNF,Door to Door etc.

5.We always choose the most economical and reliable shipping company to make sure you receive the goods in time.

6.The tracking number will be provided to you once the consignment is shipped.

After Sales Service

1.All the products have one year guarantee.

2.Providing professional installation instructions and video of troubleshoot.

3.We supply after sales service for 24 hours, 7 days per week. Customer can contact us any time.

4.When some problems can’t be solved by customers, our engineer can go to door to support.

Company Introduction

FAQ

Q1: What are the payment terms?

A: We usually accept payment by T/T, L/C, Western Union or Escrow.

Q2 : Can any of the products be custom imprinted?

A: If you need to print your company logo on the products and that is available to be custom. Or if you have your own designed idea and that will be our honor to customize for you.

Q3: This is my first time to import, how can I trust your company and ensure to get the goods if I order from you?

A: We are alibaba legitimate certification company (VIP), and we support payment terms like L/C, Escrow, to ensure your safety.

Q4: How to ensure that I received the machine undamaged?

A: At first , our package is standard for shipping, before packing, we will confirm product undamaged, otherwise, please contact within 2days. Because we've bought insurance for you, we or shipping company will be responsible!

Q6 : Where will the orders be shipped from?

A: It will ship from the main ports China. And We will find the shipping company which will offer the best and most economical freight for our customers.

How to contact us?

Email: sales01@orangecoltd.com

Whatsapp: +86-15939582629