Din Rail Energy Meters, buy 3 Phase Din Rail Kwh Electric CT Power Consumption Meter on China Suppliers Mobile

Product Details

Product Introduction

3 Phase Din Rail Kwh Electric CT Power Consumption Meter

DZS310 is an advanced, smart multi-channel combined metering terminal with standard Din rail installation. It is widely used in energy distribution sites, energy management systems and intelligent on-line monitoring systems of different industries. It can measure electric parameters i.e. three-phase voltage, three-line voltage, three-phase current, active power, reactive power, apparent power, power factor, frequency, active energy, reactive energy etc. with high accuracy.

Product Function

• Measuring all parameters: three phase voltage, current, line voltage, active power, reactive power, apparent power, power factor, frequency, active energy, reactive energy etc.
• CT, PT or voltage direct connected, suitable for various wiring modes under high or low pressure environment
• 1 interface* RS485
• Modbus RTU communication protocol

• 1* programmable energy pulse output

Product Parameters

Accuracy Class	Voltage: 0.5; Current: 0.5; Frequency: 0.05 Hz; Power Factor: 1
		Active Power: 1; Reactive Power: 1; Apparent Power: 1
		Active Energy: 1; Reactive Energy: 2
Input	Voltage:3*220V/380V (Voltage Range: 0.6Un~1.2Un)
		Current: 100mA (Current Range: 1‰In~4In)
		Frequency Measuring Range: 45~65Hz
Communication	RS485 port MODBUS RTU protocol; Baud Rate: 1200~9600bps (settable)
Power Supply	AC: 85-265V; DC: 85-300V
Consumption	<3W
Working Condition	Operating: -20°C~+65°C. Storage: -40°C~ +85°C
		Relative Humidity: < 93% (place without corrosive gas)
		Altitude: <4000m
Dimensions	90×35×60mm
Installation	Standard Din rail installation