D52-2047 DIN-rail multi-function Digital meter can measure AC voltage, AC current, power factor, active power,electric energy and electric energy of cumulative time.

1. Accuracy: 1%± 2 words

2.Display Mode: AC voltage and power factor use four red led of 0.31-inch

                              AC current and electric energy of cumulative time use five red led of 0.31-inch

                                     Active power, electric energy use five green led of 0.31-inch

3.Range: AC voltage : AC 80.0-300.0V/ AC 200.0-450.0V ( You should select the one type of meter in your order ).

                AC current:AC 0.0-100.0A ( when measure signal lower than 100A, the accuracy is 0.01A, when measure

                                                                 Signal higher than 100A, the accuracy is 0.1A, the accuracy auto-change)

                Active power: 0.0-30000W ( measure voltage AC 80.0 - 300.0V )

                                         0.0-45000W ( measure voltage AC 200.0 - 450.0V )

Electric energy: 0.000-99999kwh

Electric energy of cumulative time: 0.00 - 999.59h

Power factor: 1.000-0.000

Electric energy of cumulative time: 0.00 - 999.59h

4.Speed: 2 times per second

5.Size: 54*80*64

6.Installation: Din-Rail

1.Connect the measuring voltage to the 1 and 2 terminal.

2.Connections of meter with internal current transformer as graph 1. Make the wire through the hole in the meter and the direction chose Arbitrarily.

3.Connections of meter with external current transformer as graph 2. Make the wire through the hole in the meter, and connect the two wires of the secondary transformer to the 3 and 4 terminal.

4.When power on, the meter will display the measure result of the AC voltage (V), AC current (A) and active power (W) and the correlative red led will light up.

5.When press the button of SAM CK (on the right of meter) down, the meter will change to display the measure result of power factor (cos?), electric Energy of cumulative time (h) and electric energy (kwh) and the correlative red led will light up.

6.When press the button of SAM CK down again, the meter will display the measure result of the AC voltage, AC current and active power. And active power.

7. When power off, the meter can save the value of electric energy and electric energy of cumulative time, and go on cumulating data When The meter . Power-on next. When the meter is displaying electric energy, you can press down the button of SAM CK last for five seconds, then the electric energy of cumulative time will to be zero and start to cumulate when release the button.