Top Selling ZigBee 32A Din-Rail Relay

Control special zone On/Off status as well as to check real-time energy usage wirelessly via your mobile App.

Introduction

The Din-Rail Circuit Breaker CB431 is a device with wattage (W) and
kilowatt hours (kWh) measurement functions.

Any home can be SMART if you want,system module in us:

- Energy ( Smart Plug, Din rail, Load Control, Power Clamps)
- Comfort ( HVAC Thermostat, Fan coil thermostat, AC control etc)
- Security ( Door/window sensor, smoke detector, multi-sensors etc)
- Lighting ( LED bulb, Relays, Smart plug, wireless dimmer switch etc)
- Video (IP camera)

Very Easy to Start Your Smart Life

   • NO.1 To get started, you will need:

                   1.  A SEG-X3 Gateway.
              2.  The SmartOWON mobile app

   • NO.2 Installation

                  1. The CB431 must be installed by a qualified electrical personnel, please keep the 

                  wiring diagram below for future reference.

   • NO.3 Connect to the gateway’s network

                  1. Set your gateway to permit joining.
             2. The LED indicator of the circuit breaker will start flashing after installation
                  indicating it is ready to join the gateway's network.
             3. The circuit breaker will join the gateway automatically and the LED
                  indicator will become steady when successfully joined.
             4. Now you can find the circuit breaker under Automation interface on the
                  mobile phone. You can control the on/off status as well as to measure the
                  power consumption of the electric circuit

 About Owon

Video pls clik the link:

 https://owon-smart.en.china.cn/company_profile.html?spm=a2700.supplier-normal.35.4.139c72d8S3pLhh#top-nav-bar