Molded fiberglass grating is a premium-quality mesh grating,While molded grating is a chemical ,resistant flooring choice for many industrial applications,panels are molded in one piece and feature a concave non-slip walking surface. The panels allow for efficient on-site cutting to minimize grating waste. Load bearing bars in both directions allow for use without continuous side support molded fiberglass grating weighs significantly less than metal gratings while a high resin content provides excellent corrosion resistance which requires very little maintenance. A high glass content offers greater stiffness and strength resulting in a higher safety factor.
Materials of Construction
Molded fiberglass grating is composed of fiberglass rovings combined with a thermosetting resin. All of the resins contain a UV inhibitor.
Standard grating has a concave profile on the upper surface for skid resistance. Grit tops are available upon request.
Thickness/Height | Specification (m) | Mesh Size |
25 | 1.22*3.66 | 38X38 |
1.22*4.04 | ||
1.22*3.66 | 40X40 | |
1*4.04 | 40X40 | |
1.22*4.025 | ||
30 | 1.22*3.66 | 38X38 |
1*4.04 | ||
1.22*4.04 | 40X40 | |
38 | 1.22*2.44 | 38X38 |
1.22*3.66 | ||
1.22*4.04 | ||
1*4 | ||
1*4.04 | ||
1.22*3.66 | 40X40 | |
1.22*4.92 | ||
1*4.04 | ||
50 | 1.22*3.66 | 50X50 |
1.22*4.015 | ||
1*4.04 |
• Corrosion Resistant
• Easy To Fabricate
• Fire Retardant
• Impact Resistant
• Low in Maintenance
• Low in Conductivity
• Lightweight
• Bidirectional Load Bearing
• Easy To Install
• Cost Effective
• Uniform in Appearance
• Molded Grating
Type M Clips
For attaching grating to supports.
Type J Clips
For attaching grating to supports for
moderate loads.
Type C Clips
For joining two unsupported edges if
needed.