Product Application
Pipes are manufactured using the discontinuous dual helix filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers can be wound with different angles. The angle with the axis of the pipe can vary between 45deg; And 88deg; . The inside diameter of the finished pipe is defined by the mandrel outside diameter and the designed wall thickness is achieved by repeated winding passes. In such a way the outside diameter of pipe (OD) is determined by the pipe wall thickness. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of the mechanical wall.
Main characteristics of this process are the following:
The Bell and Spigot joint is an integral part of the pipe
The cross winding allows enough flexibility in the design to specify pipe of any axial and hoop strength
The axial strength is normally higher than that of pipes produced with other processes
Pipe stiffness is not related to joint stiffness which in any case is higher than the pipe stiffness and guarantees a very stable joint practically without deformation
The pipe could be made with our without silica sand depending on the load conditions
Nominal Pressure Classes
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are: 4, 6, 10, 16, 20 bars. Intermediate or higher-pressure classes can be provided depending on the design parameters and conditions.
Pipe Stiffness Classes
Pipes are also classified according to specific pipe stiffness. Standard stiffness classes are: 1250, 2500, 5000 and 10000 Pa. Intermediate or higher stiffness classes are available on request or depending on the design conditions
DN (mm) | Lengtg (mm) | 0.6Mpa thickness | 1Mpa thickness | 1.6Mpa thickness |
10 | 1800 | 4.6 | 4.6 | 4.6 |
15 | 1800 | 4.6 | 4.6 | 4.6 |
20 | 1800 | 4.6 | 4.6 | 4.6 |
25 | 1800 | 4.6 | 4.6 | 4.6 |
32 | 1800 | 4.6 | 4.6 | 4.6 |
40 | 1800 | 4.6 | 4.6 | 4.6 |
65 | 6000 | 4.6 | 4.6 | 4.6 |
The water tank has one year s guarantee. If it breaks down, generally speaking, our technicianwill figure out what the problem may be, according to client s feedback. Parts will be replaced for free if the problems are caused by quality fault.
2.How long is the delivery time?
For standard water tank less than 100m3, it would be 3-5 days; For non-standard water tank and customized water tank according to client s specific requirements, it would be 15 to30 days.
3.How's the payment?
Telegraphic Transfer(T/T).LC and western union are all acceptable
4.Do You Arrange Shipment For The Machines?
Yes, dear esteemed customers, for FOB or CIF price.
For EXW price, clients need to arrange shipment by themselves or their agents.
5.How is the packing?
steel frame or plywood Box Package with Steel Belt
Save space as much as possible for container loading