Septic tank, buy Cheap FRP fiberglass Moulded septic tank on China Suppliers Mobile

Product Details

Product Description

Volume	Size	Thickness	Weight	Material
(m3)	(mm)	(mm)	(kg)	Material
0.5	796*1298	3.2	32	FRP
0.87	910*1620	3.3	44	FRP
1	1015*1735	4	52	FRP
1.5	1160*1690	4.5	75	FRP
2	1266*1966	5	92	FRP
2	1266*1966	7	134	FRP
2.5	1266*2266	7	158	FRP

Septic tank is a principle of using anaerobic digestion to remove sediment and suspended organic matter sewage primary treatment of the structures of the most sewage contains large amounts of manure,litter,insect pathogens and other impurities, suspended solids concentration of 100-350mg of solid / L.Sewage into the septic tank after 12-24h of precipitation 50% -60% removal of suspended solids.Sludge settling down more than 3 months after anaerobic digestion,decomposition of organic matter in the sludge into a stable inorganic,perishable raw sludge into a stable mature sludge,changed the structure of the sludge,reducing the moisture content of sludge,regular Qingtao Sinotrans,landfill or used as fertilizer.

1. without leakage and leakage, eliminate two pollution The seal is good, and the pollution caused by the seepage of the groundwater in the traditional new septic tank water treatment is completely placed. 2. convenient construction and convenient installation The product is light and easy to transport. The product is formed as a whole and fast in installation. 3. never corrode, long service life It is made of high quality FRP composite, which has the advantages of anti acid, anti alkali, tensile, compression and impact resistance. 4. a variety of products, flexible choice The unique structure design and high efficiency membrane packing are used, the area is small, the site selection is flexible, especially in the old city building.

1.FRP Septic Tank Introduction: The main body material of whole septic tank is glass fiber reinforced unsaturated polyester resin of high strength glass fiber composite materials , using advanced glass fiber reinforced plastic winding process made tank plus the bump surface wheel of head shape structure . steel degrees optimized design, unique structure design, leading technology , with the characteristic of light weight, high strength,well corrosion resistance, no leakage,no pollution, better formability ,long service life etc. Both ends of tank equipped with inlet tube ,outlet tube and the tank top equipped with inspection hole, using partition mesh division in the tank, equipped with circulation flashing device in order to add sewage residence time to improve corrupt effect.

As the most efficient sewage treatment device, it is widely used in treating the sewage in the area of senior hotels, villa districts and residential districts, etc. The water after treatment would meet the national emission standards. 2. Feature: 1. intensive degree is high, the various kinds of water treatment process organic combination for an organic whole, remove high efficiency.

2. due to the combination of science, volume efficiency is high, can be ploughed back, saving investment, low operating cost.

3. the operation of equipment are microcomputer automatic control, management and maintenance easy.

4. equipment operation basic no noise, no smell, no impact on the surrounding environment.

5. equipment specification is complete, the design selection is convenient.

Detailed Images

Certifications

Packing & Delivery

Related Products

Merits and features:
1. perfect corrosion-resistant performance; anti-aging and long lifetime.

2.Light weight; high strength; heat insulation; non-toxic and smooth surface

Application :
1. Industrial Water Treatment with multi-layer media

2. Water Softening

3. Centralized Filtration System for high rise residential and commercial buildings such as residence, high rise office building, hotels and resorts.

4. Aquaculture, fish farming filtration system

5. Many other water filtration and treatment applications.

Full choice of pressure tanks:
1.Residential tanks (08"~12"diameter)

2.Commercial tank (14"~24" diameter)

3.Industrial tanks (30"~80"diameter)

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock.or it is 15-20 days if the goods are not in stock,it is according to quantity.

Q: Do you provide samples?is it free or extra ?
A: Yes, we could offer Certain sample for free charge but do not pay the cost of freight.
Please contact me to confirm.

Q: What is your terms of payment ?
A: Payment<=1000USD,100% in advance. Payment>=1000USD,30% T/T in advance,balance before shippment.