Water tank, description about FRP/GRP SMC Water Storage Tank With ISO Certificate on China Suppliers Mobile

Product Details

Product Description

Material	GRP/FRP/SMC
Size	1x1m, 1x0.5m, 0.5x0.5m
Panel Shape	Ball shape
Thickness	4-16mm
Remarks	Thickness Tolerance: ±0.2mm
Volume	From 1m3 to 1000m3
COLOR	White,Blue,and so on
SMC water tank physical and chemical properties	ensile strength (Mpa)≥60
	Bending strength (Mpa)≥100
	Bending modulus (Gpa)≥7.0
	Pap hardness≥60
	Bibulous rate,%≤1.0
	Glass fiber content,%≥25
Leakage	No leakage after filled with water
Full of water deformation	Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation

GRP Water Tank Features

1.GRP is short of glass reinforcement plastic which is made of resin,fiber and calcium etc.
2.It is sectional structure and assembled by panels among 1000x1000mm,1000x500mm,500x500mm three sizes,customized according to the requirement.
3.GRP water tank is widely used in Building,hospital,bath center,water treatment,climate-drought region etc.
4.It is machine-molded product and all raw materials are environment friendly and hygienic to health.

SMC GRP FRP Storage Water Tank Application

1). Storage and regulation of living water supply & construction water supply
2). Rainwater Harvesting & Storage
3). Effluent/Acid and alkali solution treatment & Storage
4). Hospital,buildings,building site, school and other place
5). Temporary water storage for expansion of the heating system, condensate tank and construction, geological survey, industry, National defense project etc

FRP Water Tank Accessories

1. Support for Panels: The panels shall be supported externally or internally by an adequate support system.
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products.
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304.
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304.
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent.
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter.
8. Man-hole opening & Inspection Hatches: the size can be customized;
9. ABS roof vent with PE insect screen.
10. Float level indicator, optional SS304 for internal and external support structure are available on request.

Production Line

Company Information

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.

Our Customers and Certificates

Our Services

Our company regards product quality as enterprise life, not only provide customers with high quality products, but also to provide customer good service.

We insist the philosophy of specialty ,service ,credit,,innovation business philosophy. We pledge to you seriously:

A : Quality commitment

1, all raw materials strictly, in accordance with design specifications elaborate strictly, full compliance with contract requirements.

2. All products must be manufacture production in accordance with national standards or enterprise, and through the municipal or more annual inspection of product quality supervision and inspection departments.

B: Price commitment

Under the same conditions of competition ,CAT would not to reduce the quality of products, based on the most favorable price to your party.

C: The delivery commitment:

Product delivery: in accordance with the user requirements as soon as possible, if you have special requirements need completed ahead of schedule, CAT can FATF design, production, and strive to meet customer needs.

D: Sales commitment:

Service principles: Our products can service for customer lifetime. Free repair service within 12 months, 12 months later as a paid service, and the paid services only charge the cost.

Purchasing our products and equipment has quality questions , you can ask the manufacturer to maintain directly. If the Equipment installation by the user, CAT will guide the user installation and make it conform to design requirements.

FAQ

Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd.

Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.

Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity.

Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.

Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.