Water tank, buy GRP water tank frp sectional water storage tanks reservoir tank 50000liter on China Suppliers Mobile

Product Details

Product Description

100000 liter GRP/FRP fiberglass square water storage tanks price in malaysia

The FRP water tank panel is made from food-grade resin, via high temperature and powerful mechanical pressing.

(1)In manufacturing process, it adopts to manufacture method that mechanical pressing so it increase the anti-seismic and shock resistance strength;

(2) In the shape design, there is sag arc in the middle of water tank plate, it improve the bearing ability of water tank. In addition, it has the 45° and 90° flange so it don't need the corner fittings.

(3) The size of the FRP water tank panel: 1000*1000mm; 1000*500mm, 500*500mm,
Thickness of the FRP water tank panel:5mm,8mm,10mm,12mm,14mm,16mm,18mm and 20mm.( 5mm thickness plate is used for the cover plate).

(4) The water tank can be assembled to be any size with the different size FRP panels from 1-1500CBM.

Product Name	GRP/SMC water storage tank
Material	Fiber glass reinforced plastic
Panel size	10001000mm, 1000500mm, 500*500mm
Process technique	Sheet molding compound
Connection way	bolt&nut connection
Production time	more than 30 years
Used	Various industries, civil water supply, HVAC, firefighting, food, beverage, vintage, water treatment, medicine, petroleum, chemical and so on.

Panel physical and chemical function				Panel physical and chemical function
Tensile Strength	≥70MPA	Pap handness	≥60
Bending strength	≥100MPA	Bibulous rate	≤1.0%
Flexural modulus of elasticity	≥5900MPA	Content of glass fiber	≥25

Features

1) Light weight, high strength.

2) Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof tank;

3) Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.

4) Corrosion resisting; anti-rusted

5) Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned easily and Manhole panel makes it easy to enter into the water tank inside.

6) Non-toxic, it is made from food grade resin, clean and no pollution. SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.

7)Convenient Installation: Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation.

Application

1)storage and regulation of living water supply & construction water supply

2)Rainwater Harvesting & Storage water tanks 10000 litre water tank 10000 litres 5000 liters water tank water storage
3)Effluent/Acid and alkali solution treatment & Storage

4)Hospital,buildings,building site, school and other place

5)temporary water storage for expansion of the heating system, condensate tank and construction, geological survey, industry, National defense project etc

FRP water tank including four parts: (1) SMC FRP panels ( Bottom panel, wall panel, roof panel and manhole); (2) Internal parts ( Internal ladder, tie piece, support, tie piece board, flanges); (3) External parts ( External ladder, angle iron, tie piece board, bolts and nuts, water level indicator); (4) U-steel base ( Painted surface treatment or hot dipped galvanized surface treatment). (5)Insulating layer( Rubber insulation material,determine thickness according to customer requirements).

Production process Step 1. Install steel footings on leveled concrete foundations. Step 2. Align GRP panels to be pre-assembled. Step 3. Place rubber sealant from ready-to-use roll between panels. Step 4. Connect panels with bolts and nuts. Step 5. Position bottom panel sections, and finish up base of tank. Step 6. Position three sides of the tank. Step 7. Position and fix roof panels and if required, roof support pipes and plates. Step 8. Install reinforcement if required. Step 9. Close up the tank with the fourth side. Step 10. Finish the internal or external reinforcement. Step 11. Fill and test.

Installation process

Packing & Delivery

Company Profile

Hengshui Aoliande Trade Co., Ltd. is professional manufacturer of FRP Pipe, FRP storage tank, FRP cooling tower, FRP molded products, FRP pultruded products and relative FRP production machines & technology. Through the continuous development and introduction of professional technology, our company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 certification, our annual sales of glass fiber reinforced plastic series products achieved 20,000 tons.

Certifications

Testing Center