Cooling Tower Offset Fluted Film Fill Media
Material | PVC | Colour | Dark gray to black |
Fire Classification | M2 | Typical module width | 1000 mm (or n*20 mm) |
Typical module length | 1998 mm (n*55.5 mm) | Typical module height | 500 mm |
Sheet thickness | 0.3 mm | Typical specific weight | 21.0 kg/m³ ± 5% |
Sheet pitch | 20 mm | Fouling rate coefficient | 1.0 (base: SNCS=1.0) |
Emptying factor | >95% | Specific heat exchange surface | 149.0 m²/m³ |
Maximum debris size | 17 mm | Maximum water temperature | 55°C |
Maximum total suspended solid | 50 ppm | Maximum salinity (sea water) | 35 gr/l |
Methods or support | Suspended or laid on beams |
|
1. Other materials options are: U-PVC & ABS.
2. Sheet thickness of 0.35 to 0.6mm; varying module sizes; fire classification (M1).
3. Temperature resistance (up to 80°C), Other colors may be obtained.
4. The corrugated sheets are solvent welded (glued) together to form pack modules.
5. The gluing can be carried out on site to avoid large volume transportation.
Contact way
Welcome to contact us for cooling tower pvc fill.Please click here"send"