Hanging PVC fill media for cross flow cooling tower
MX75 is a hanging film type that is installed in a crossflow cooling tower. It achieves cooling by spreading water into a thin film over a large vertical surface thereby exposing the water to the maximum amount of air flow.
The degree of cooling that can be achieved by a specific fill depends to a large extent on the size of the fill’s contact surface and the duration of time that the water is exposed to air. MX75 fill provides much more water surface exposure per cubic foot than splash type fill.
We can do 1520mm,1220mm,1020,915mm,813mm width with any length
black PVC cooling tower fill, we also can do according to client's demands.
1. cooling tower fill specifications:
1) Size:1520/1220/1020/915/813*random length
The normal size is: 915*1854mm,915*2260mm,915*2970mm,1220*1854mm, 1220*2260mm,1220*2970mm etc.
2) Material: PVC fill
3) Usage: water cooling tower
4) Color: black
5) Type: counter flow
6) Temperature suitable:80 degree C-35 degreeC
7) Installation easier and faster
8) Offering great cooling efficiency
9) Absorption rate: < 0.015%
10) Drift water loss rate:<0.001%
2. PVC Cooling Tower filter Filling Technical Data:
SURFACE AREA | SHEET SPACING | FLUTE ANGLE | SHEETS PER FT. | MEDIA PACK SIZES: | ||
Minimum | Maximum | Standard | ||||
48 ft2/ft3 | 19 mm | 30° | 16 | D: 12 in | D: 24 in | D: 12 in (305 mm) or |
pp material
pvc material
Packing and delivery
Other selling hot cooling tower fill
CUSTOMER BENEFITS:
1) Increasing cross-sectional area,add water retention time.
2) Using pvc material.
3)Have ISO standard guarantee.
4) Lower pruchase cost.
5) Professional shopping guide.
6) Saving selection time.
7) Meet special purchase requirements of customer.
Contact way