FES Economical Electronic Flow Switch
Real-time monitoring of the liquid flow in the pipeline, providing switch output, and using 6 LEDs to display the fluid flow rate status in real time, it can achieve the following monitoring functions: medium flow, reduce/increase flow rate; medium presence/absence; medium flow/ Static; monitor the fluid flow rate in the pipeline, monitor the interruption of flow, or prevent the idling of the pump. It is widely used in petrochemical, electric power, metallurgy, steel mills, papermaking, food processing, water treatment, battery factories and other industries.
FES economical electronic flow switch features:
1. Affordable, suitable for mass use on equipment, reducing costs.
2. Replace the baffle type flow switch, with sensitive action and long service life.
3. Can effectively prevent entanglement.
4. Full waterproof shell design.
5. It is suitable for a large range of pipe diameters, and the set point can be adjusted arbitrarily.
6. The indicator light directly displays the flow change.
Conventional flow switches or flow indicators mostly use baffles or pistons, which rely on liquid flow to push the baffles or pistons to act. The water resistance is large, the flow loss is large, the accuracy is poor, and it is impossible to monitor small flow. The sealing part is sealed with metal bellows, which is resistant to pressure difference and prone to metal fatigue burst.
working principle:
FES economical electronic flow switches are designed based on the principle of heat exchange. The probe has a built-in heating module and a heat-sensing module. The heat conduction of the flow switch is closely related to the flow rate of the medium. During measurement, the heat-generating module emits heat. If there is no medium flowing in the pipe, the heat received by the heat-sensing module is a fixed value. When there is a medium flowing, the heat received by the thermal module will change with the flow rate of the medium. The thermal module converts the temperature difference signal into an electrical signal, and then converts it into a corresponding standard analog signal or contact through the processor. Signal output, the flow switch displays and controls the flow rate of the medium through this signal.
FES economical electronic flow switch can easily set the flow alarm node, unscrew the protective screw, and adjust the setting knob with a screwdriver to set the flow alarm point. For the flow switch whose output form is P N P, N P N and relay, the meaning of its LED indication is as follows:
- Red light on Flow rate below set point (transistor not conducting/relay not operating)
- Yellow light on Flow rate equal to or higher than set point (transistor on/relay action)
- Yellow and green lights The extent to which the flow rate exceeds the set point (green lights 1, 2, 3 or 4 are on together with the yellow lights)
technical parameter:
Measuring range: water: 0.03 ~3m/s;
Oil: 0.0 3 ~3m/s;
Gas: 2 ~20 m/s
Withstand voltage: 1.6 MPa
Connection: Thread G 1 / 2 ", G 1 / 4 ", other
Switching time: ON: Typical ≥4 s (1 ~1 3s);
O F F : Typical ≥ 4 s (1 ~ 1 5s)
Temperature change response time: ≤1 2 s
Working voltage: DC 2 4 V
Power consumption: 2 W
Output: Relay, N P N / P N P output
Contact capacity: 2 A / 2 2 0 VAC, 3 A / 30VDC
Insulation resistance: 100 MΩ at 100V DC
Number of control contacts: 1 pair
Contact capacity: 2A / 220 VAC, 3A / 30VDC
Insulation resistance: 100 MΩ at 100VDC
Probe material: 304 stainless steel
Shell material: PP
Working temperature: - 10℃- 60℃
Environmental conditions: - 2 0 ~8 5℃,≤8 5 % RH
Protection class: IP 6 7
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.
A: We have no MOQ limit, small quantity order is acceptable.
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
A: We could accept T/T, Paypal, WU.
For more information, please contact us~