The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

G.652	G.655	50/125μm	62.5/125μm
Attenuation (+20°C)	@850nm			≤3.0 dB/km	≤3.0 dB/km
	@1300nm			≤1.0 dB/km	≤1.0 dB/km
	@1310nm	≤0.36 dB/km	≤0.40 dB/km
	@1550nm	≤0.22 dB/km	≤0.23dB/km
Bandwidth (Class A)	@850nm			≥500 MHz·km	≥200 MHz·km
	@1300nm			≥1000 MHz·km	≥600 MHz·km
Numerical Aperture				0.200±0.015NA	0.275±0.015NA
Cable Cut-off Wavelength λcc		≤1260nm	≤1480nm

 

 

 

 

 

 

 

 

 

 

FAQ

 

1.Are you the real manufacturer?

Us. We are the real manufacturer with 15 year’s history.

 

2.What’s  the MOQ?

Us. The MOQ of Fiber Optic cable is 1km.

 

3.What’s delivery time?

Us. The general delivery time is 5-7 days after order confirmed. It depends on the order quantity.

 

4.How to Store the Optical Fiber Cable Properly?

Us.  Store the drum indoor before using, the drum should place sideways not on the end.

 

5. Can you supply customized products and logo?

Yes. We supply OEM service. You can send us your drawing.

 

6.What’s your payment terms?

Us. We accept T/T,L/C,Western Union,D/P etc.  30% in advance and 70% before shipment.