Hastelloy Alloy, buy C-276 C276 C-22 Hastelloy Hartz Alloy Steel Pipe on China Suppliers Mobile

Product Details

Product categories

Product Details

Hastelloy C - 276 alloy is a kind of nickel - chromium - molybdenum containing tungsten alloys, low carbon content of silicon, i s regarded as a universal corrosion resistant alloy mainly wet chlorine various oxidation resistance chloride chlorate solution of sulfuric acid and oxidizing salt, in low temperature and temperature in the hydrochloric acid have good corrosion resistance as a result, nearly thirty years in harsh corrosive environments, such as chemical petrochemical flue gas desulfurization pulp and paper is widely applied to the environmental protection industry.

Application:

Petrochemical equipment, heat exchanger, flue gas desulfurization equipment, fluid chemical pump, fluorine chemical, etc

Has the following properties:

● It has excellent corrosion resistance to most corrosive media in oxidation and reduction atmosphere
●Good crevice corrosion pitting corrosion and stress corrosion resistance high Mo content of Cr alloy can resistance to chlorine ion corrosion, W elements to further improve the corrosion resistance at the same time, hartz C - 276 alloy is one of the several kinds of wet chlorine and chlorine dioxide hypochlorite solution corrosion resistant materials, one of the high concentration of chlorate solution such as ferric chloride and copper chloride have significant corrosion resistance, suitable for all kinds of the concentration of sulfuric acid solution is one of the few can be applied to one of the hot material of the sulfuric acid solution.

Mechanical properties:

Tensile strength: σb≥730Mpa, elongation:δ≥40%, hardness :HRB≤100.

Hastelloy C-276 alloy thermoforming is immediately annealed and quenched with water at 1150℃. Cold deformation of Hastelloy C-276 alloy will increase its strength.

Hastelloy C - 276 alloy and the formability of common austenitic stainless steel has a similar but because of its is bigger than the strength of the common austenitic stainless steel, so there will be greater in the process of cold forming stress and work hardening rate of this kind of material much faster than ordinary stainless steel, cold forming process, so in has extensive take midway annealing treatment

Product name	C-276 C276 C-22 Hastelloy Hartz Alloy Steel Pipe
Grade	hastelloy B/B-2/B3/C/C-276/C-22/C-4/X
Standard	AISI,ASTM,DIN,JIS,BS,NB
Origin	Tisco, baosteel, jiusteel and so on
Specification	Wire: 0.01-10mm Strip: 0.055.0-5.0250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm Or Customized
Chemcial Composition (%)	Ni:57min,Cr:16.0,Co:2.5max,Mo:16.0,W:4.0, Fe:5.0,Si:0.08max.Mn:1.0max,C:0.01max,V:0.35max
Density	8.89g/cm3
Package	clients' requirement and Standard export sea-worthy packing
Delivery time	5-15 days subject to the clients' requirement and quantity

Surface finish	Characteristics & Application
NO.1	Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices.
NO.2D	Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings.
NO.2B	The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3	Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc.
NO.4	Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc.
HL	Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc.
BA	Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.

packing

Company Profile

Workshop

F A Q

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.