Stainless Steel Bar, buy 310 316 316L 321 347 Stainless Steel Bar Customized Rod on China Suppliers Mobile

Product Details

Product Description

Chrome-nickel austenitic (300 series) stainless steel has excellent corrosion resistance, forming property and strong toughness in a wide range of temperature differences. It is the most commonly used material for fasteners, joints, pipes and pipes.Since the strength of the 300 series stainless steel is enhanced only during cold forming, the thermal cycle will reduce the strength of the fasteners to the annealed state when the temperature reaches 1000°F(approximately 283°C).

Product Name	310 310S 316 316L 361Ti 321 347 Stainless Steel Bar Customized Rod
300 Series	SS 310 310S 316 316L 316Ti 321 347
Nearly Brand	*310:* 1Cr25Ni20Si2, UNS S31600, DIN 1.4401, JIS SUS316
		*310S:* 06Cr25Ni20, UNS S31008, DIN 1.4845, JIS SUS310S
		*316:* 06Cr17Ni12Mo2, UNS S31600, DIN 1.4401, JIS SUS316
		*316L:* 022Cr17Ni12Mo2, UNS S31603, DIN 1.4404, JIS SUS316L
		*316Ti:* 06Cr17Ni12Mo2Ti, UNS S31635, DIN 1.4571, JIS SUS316Ti
		*321:* 06Cr18Ni11Ti, UNS S32100, DIN 1.4541, JIS SUS321
		*347:* 06Cr18Ni11Nb, UNS 34700, DIN 1.455, JIS SUS347
Specification	Diameter: 10~300mm, Length: 3000~6000mm
Type	Round/Square/Hexagonal/Angle/Flat Bar
*Payment Term	By T/T, 50% down payment, 50% balance before shipment.

310 Stainless steel is austenitic chrome-nickel stainless steel with good oxidation resistance, corrosion resistance, because of the high percentage of chromium and nickel, 310s has much better creep strength, under high temperature can continue to work, with good resistance to high temperature.

310S Stainless Steel (0Cr25Ni20) is austenitic chrome-nickel stainless steel with good oxidation resistance and corrosion resistance, because of the higher percentage of chromium and nickel, 310S has much better creep strength, can continue to work at
high temperature, with good high temperature resistance.

316 stainless steel is the second most widely used steel after 304. It is mainly used in food industry, clock jewelry,
pharmaceutical industry and surgical equipment.Because of its better resistance to chloride corrosion than 304, it is also used as "Marine steel". SS316 is commonly used in nuclear fuel recovery plants.

316L is a kind of stainless steel containing molybdenum, because of the molybdenum in the steel, the overall performance of the steel is better than 310 and 304 stainless steel, under high temperature, when the concentration of sulfuric acid is less than 15% or more than 85%, has a wide range of uses. It also has good resistance to chloride corrosion, so it is commonly used in Marine environments.The maximum carbon content of 316L stainless steel is 0.03, which can be used in applications that cannot be annealed after welding and need maximum corrosion resistance.

321 stainless steel is ni-cr-ti type austenitic stainless steel, with abrasion resistance, high temperature resistance, creep resistance, etc., for the manufacture of wear-resistant acid containers and wear-resistant equipment lining, pipeline. In addition to the addition of titanium element to reduce the risk of material weld corrosion, other properties are similar to 304.

316Ti, a metallic material, is added to SUS316 steel to improve its resistance to intergranular corrosion.Used to resist sulfuric acid, phosphoric acid, acetic acid, acetic acid equipment.

347 stainless steel with stable element niobium, suitable for welding aviation parts and chemical equipment.

	310	310S	316	316L	316Ti	321	347
Density g/cm3	7.98	7.98	7.93	7.98	7.98	7.98	7.98
Tensile strength σb (MPa)	≥515	≥515	≥520	≥515	≥520	≥620	≥520
Yield strength σs (MPa)	≥205	≥205	≥205	≥205	≥205	≥310	≥205
Elongation δ5 (%)	≥40	≥40	≥40	≥40	≥35	≥ 30	≥35
Hardness HRB	≤90	≤90	≤90	≤90	≤90	≤90	≤90

*Storage: Pay attention to moisture, dust, oil, lubricating oil, as well as surface rust, or poor welding corrosion resistance.When water is immersed between the film and the steel substrate, the corrosion rate is faster than that without the film.Warehouse storage should be placed in a clean, dry and easy to open the air, to maintain the original packaging state, the stainless steel film should avoid direct light, film should be periodic inspection, if the film deterioration (film life of 6 months) should be replaced immediately, if the packing material when pad paper, in order to prevent surface corrosion should be
immediately removed pad paper.

Our Service

Custom service
Metal element	Can add a certain metal element, according to customer requirements for metal element content adjustment
Specification	Regular size, large size, small size
Surface	No.1, No.2D, No.2B, No.3, No.4, #320, HLNo.4, BA
Hardness	Super soft, soft, semi-soft, low hardness, hard
Technology	Hot rolling, cold drawing, normalizing, annealing, high temperature tempering, solid solution treatment
Edge state	Yes or no trimming

After-sales service

Within 7 days after the customer receives the goods, can return or replace the goods and claim for compensation if there are quality problems. And the freight shall be borne by our company.
*Returns and exchanges are not acceptable undder the following circumstances:
1. Non-pruduct quality problems.
2. The product purchased cannot be used due to the customer's fault (please inform the purpose and other details of the product when you inquiring).
3. Product quality problems caused by natural disasters and other force majeure factors in transit.
4. Due to the customer transport, storage and other improper resulting in product quality problems.